Anchor point for cavity ceilings ABS Lock X SR HD
Anchor point ABS Lock X for hollow concrete
LOCKX CAVITY CEILING(LX-SR-HD-500) 500 M
Register now and access more than 125,000 products
You can order the anchor point in different sizes between 300 mm and 1000 mm. The required overhang varies depending on the roof covering and the planned catching or holding system.
All components of the ABS-Lock X-SR-HD, from the anchor eyelet and base plate (150 mm x 150 mm) through to the welded support tube (Ø 42 mm), are made of weather-resistant stainless steel. The 4 required hollow-core plank anchors are included in the scope of delivery. Correctly installed, the anchor point can be used in any direction of load. Thus it is ideally suited as an intermediate or end support in rope harness systems, which you can use to secure your roof comprehensively and without breaks.
A complete fall arrester includes high-quality and comfortable protective equipment.
Datasheets(X)
- DIN EN 795:2012, C & CEN/TS 16415:2013
- Base plate + welded support tube
- Concrete hollow ceiling ≥ C45/55 (B55)
- Mirror thickness min. 25 mm
- Secured with 4 expansion anchors
- Attachment possible in cavities and in solid material
Securing device ABS-Lock X-SR-HD is securely attached to ribbed and concrete hollow ceilings using 4 special hollow-core plank anchors (expansion anchors). The mounting surface requires a quality of at least C45/55 (B55).
Material | Stainless steel |
Rod length | 500 mm |
EN standard | 795 |
Suitable for use in the following materials | Concrete, Light concrete |
Type description | LX-SR-HD-500 |
Height | 500 mm |
Colour | Stainless steel coloured |
Surface | Stainless steel FINISH |
Last viewed
Bolt cutters
Toggle lever for ISO P clamping system
Sealing plug GPN 300 F Polyethylene (PE-LD), natural
Universal load dolly
Accessories, hammers Halder hammer insert Series 3202
Hexagon Socket Head Cap Screw
Manual screw tap, assortment 3-piece Ruko hand tap cassette HSS DIN 352
Hexagon Socket Head Cap Screw
System case 8.4.5
Hexagon socket set screw with ring cutter ISO 4029, steel 45H, zinc-plated, blue passivated (A2K)