Angle screw-in connector complete fitting For central lubrication units and hydraulics
Angled screw-in connector complete fitting
FITT-CLS-(SCREWIN-FITT)-ANGL-D6-M6X1KEG
Register now and access more than 125,000 products
- The exterior connection threads are tapered and thus self-sealing
- The size of the exterior connection thread is dependent on the thread of the opposing component.
The angle screw-in connectors for 4-mm and 6-mm pipe diameters are suitable for use in the low-pressure range only.
Datasheets(X)
For connecting a pipeline to a lubrication point or sub-component
 | |
Connection thread (d2) | M6 |
Outlet thread (d) | M6 x 1 tapered |
Width across flats (SW) | 11 mm |
Width across flats 2 (SW2) | 12 mm |
Material | Steel |
Surface | Zinc plated yellow |
Last viewed
Business shirt
Straight pin, unhardened DIN 7, A1 stainless steel, plain
THM 439 holding magnet
Natural stone sealant 4 in 1
1/2 inch impact socket wrench, inch, hex., short
1/2 inch spiral socket
HSCo Multi Performance machine tap for blind holes DIN 371/376
Floor unit hanger
Aluminium security door fitting S 31
Hygienic USIT® sealing and flat washer 75 Fluoroprene® XP 45 - blue With elastomer bead for dead space-free sealing of screw connections