Angled washer 45° oval hole
Angled washer 45 degree long hole steel
ANGLWSH-CS-45DGR-CAST-(A3K)-12,7X6
ASSY
Register now and access more than 125,000 products
- High fitting accuracy and precise 45° specification for screwing the ASSYplus FT 4 screws
- Screw head does not pull through when using thin-walled metal tabs
- Quick and easy mounting of the angled washer through a simple oval hole in the metal plate
- Clean appearance of the finished screw connection
- Application in utilisation classes 1 and 2
To create metal cut-outs in the pull tab, download CAD drawings of the required holes from the Download section.
ETA-11/0190
Datasheets(X)
CAD data (available after login)
Ideal for mounting metal draw plates in indoor and wet areas with ASSY 4 CSMP or ASSY 3.0 or ASSYplus FT 4 countersunk screws made of steel.
Fit the 45° angled washer correctly by aligning it with the front of the cut-out. We recommend producing a pilot hole of depth 4xd to prevent the angled washer lifting when bolting with ASSYplus 4 FT screws.
 | |
Internal diameter (d) | 12.7 mm |
Elongated hole length/ elongated hole width | 50 x 13 mm |
Effective length (n) | 19.8 mm |
Insertion length (l) | 49.7 mm |
Length (L) | 59 mm |
Height (h) | 23.5 mm |
Distance between centre of hole and edge (k) | 34 mm |
Insertion depth (h1) | 5.6 mm |
Internal width (b) | 12.8 mm |
Width (a) | 30 mm |
Countersink diameter (D) | 26 mm |
Screw-in angle | 45 Degree |
Countersink angle (α) | 90 Degree |
Material | Cast steel |
Surface | Zinc plated |
Product weight (per item) | 160.000 g |
Min./max. material thickness | 6-25 mm |
Suitable for screw | ASSY 3.0 countersunk head diameter 12 mm, ASSYplus VG countersunk head diameter 12 mm, ASSY 4 countersunk head diameter 12 mm |
Area of application | Timber construction, Metal wood connections, Structural woodwork |
Approval | ETA-11/0190 |
RoHS-compliant | Yes |
Last viewed
Twist drill bit HSCo DIN 1869 R3 type RN
Slotted cheese head DIN 84, steel 4.8, zinc-plated, blue passivated (A2K)
Drill gauge For spigot hinges consisting of two and three pieces
SCHIMOS 80/120-G front panel profile for glass doors
Type SK coupling sleeve With hexagon socket
Hammer drill bit Plus EUROFAST 2-spiral
Women's softshell jacket Stretch X
Twist drill bit HSCo DIN 338 Type RN MFD VARIO
Hole puncher with splitting punch Metric ISO sizes in accordance with EN 50262
Hexagonal bolt with thread up to the head ISO 4017, steel 8.8, zinc-plated, blue passivated (A2K)