Welcome to Würth Aerospace Solutions For trade customers only

Anti-germ coating

Disinfection spray with anti-germ coating
DISINFSPR-GERM-COATING 250ML

Art.-no. 0893117061
EAN 4065746482752
Prices for customers after login
Anti-germ coating

Art.-no. 0893117061

Prices for customers after login
Quantity
PU
x 1 pcs

Exclusively for trade customers

Register now and access more than 125,000 products

Long-term surface protection against viruses and bacteria
  • Self-disinfecting, biocidal-free permanently effective antibacterial and antiviral protective coating for coating door handles, light switches, handrails and similarly small surfaces with frequent hand contact.

  • For effective protection against enveloped viruses, bacteria, fungi and germs

  • This antimicrobial effect is purely physical/mechanical and is not due to chemical or ionic interactions.

  • Anti-germ coating is free of biocides and nanoparticles

  • Dermatologically tested and rated "Very good"

  • Gentle on materials

  • Protection can be demonstrated by means of a UV marker

  • Surface protection up to 6 months
Notice

After use: To clean the spray can, hold the can vertically with the head down and press until only propellant comes out. Remove clogged nozzle from the can and open it up again using a needle. Please note that applying the coating may cause the appearance of the surface to change. Antimicrobial effect tested by independent testing laboratories: 99.99 % effective against gram-positive and gram-negative bacteria (tested in accordance with JIS Z 2801/ISO 22196 against staphylococcus aureus, MRSA, E. coli) 99.99 % effective against enveloped viruses (effect tested within 8 hours according to screening test S2 based on the RKI guideline [1995] and ISO 21702:2019 against coronaviruses).


The antimicrobial effect is purely physical and is not due to chemical or ionic interactions. The anti-germ coating is free of biocides and nanoparticles.

The usage instructions are recommendations based on the tests we have conducted and on our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We ensure the consistent quality of our products. We reserve the right to make technical changes and further develop products. Please observe the technical data sheet!

Product information

Datasheets(X)

Safety data sheet

Certificates/ Documents

 | 

 | 

Application area
  • Door handles, light switches, handrails and similarly small surfaces with frequent hand contact

  • Content sufficient for approx. 100-125 door handles or light switches
Instructions

The surface must be clean, dry and free from oil, silicone and grease. Not suitable for glass, rubber and PVC-based synthetic leather. Cover surfaces that you do not want to be sprayed. Shake the spray can vigorously. Hold the can vertically and spray two to three thin, even layers from distance of approx. 15-20 cm away. Drying time (touch dry): approx. 4-6 hours depending on the surface (room temperature). The antimicrobial effect can be checked with a UV lamp (395 nm) either during application or at a later stage. Keep the treated surfaces clean. Clean surfaces with pH-neutral cleaners.

AOX-free

Yes

Chemical basis

Polymer

Density

0.708 g/ml

Density conditions

at 20°C

Colour

Transparent

Contents

250 ml

Weight of content

177 g

Shelf life from production

24 Month

Conditions to maintain shelf life from production

at 5°C to 30°C and max. 60% relative humidity

Silicone-free

Yes

Required accessory:
 
Product
Description
Quantity
PU
Price
/PU
LED UV torch For use when searching for leaks highlighted by UV leak detection additives in vehicle air-conditioning units

TRCH-UV-LED-3XAAA

For use when searching for leaks highlighted by UV leak detection fluid in vehicle air-conditioning systems.
x 1 pcs
The packaging unit defines the number of articles in one packaging. In the catalog segment you can choose from different packaging units if a pop-up menu is displayed.

Just leave the field empty if you don't know the packaging unit when directly entering the article number in the shopping basket or when importing with Easy-/VarioScan. The packaging unit will be determined automatically.
The article number is made up of the following: VVVVAAABBB
VVVV = 4 digits for prefix number (please note that the first digit is currently always 0)
AAA = 3 digits for dimension part 1
BBB = 3 digits for dimension part 2

Example article number structures:
Example 1: Screw with dimensions of 4x10 mm:
VVVVAAABBB
00574 10 (2 spaces between the 4 and the 10)

Example 2: Screw with dimensions of 10x20 mm:
VVVVAAABBB
005710 20 (1 space between the 10 and the 20)

Example 3: Flat washer with an internal diameter of 6 mm:
VVVVAAABBB
04076
Price per packaging unit (PU):
The displayed price is always in line with the displayed packaging, if the PU is 250 the price for 250 units, if the PU is 300 the price for 300 units.

Price with price key representation (PSL):
The price always applies to a quantity ruled through the price key:
Price for 1 unit
Price for 100 units
Price for 1000 units
The quantity shows the number of pieces or units of measure contained in the order or delivery for the respective article.
In contrast to sales packaging and secondary packaging, the disposal costs for chemical-technical products are shown separately. The breakdown of the individual costs can be found on the relevant products and also in the shopping cart, as well as in our General Terms and Conditions (GTC).
Additive article:
 
Product
Description
Quantity
PU
Price
/PU
High Power battery

BTRY-ALKALI-AAA-MICRO-LR03-1,5V

Battery power for energy-intensive applications
The packaging unit defines the number of articles in one packaging. In the catalog segment you can choose from different packaging units if a pop-up menu is displayed.

Just leave the field empty if you don't know the packaging unit when directly entering the article number in the shopping basket or when importing with Easy-/VarioScan. The packaging unit will be determined automatically.
The article number is made up of the following: VVVVAAABBB
VVVV = 4 digits for prefix number (please note that the first digit is currently always 0)
AAA = 3 digits for dimension part 1
BBB = 3 digits for dimension part 2

Example article number structures:
Example 1: Screw with dimensions of 4x10 mm:
VVVVAAABBB
00574 10 (2 spaces between the 4 and the 10)

Example 2: Screw with dimensions of 10x20 mm:
VVVVAAABBB
005710 20 (1 space between the 10 and the 20)

Example 3: Flat washer with an internal diameter of 6 mm:
VVVVAAABBB
04076
Price per packaging unit (PU):
The displayed price is always in line with the displayed packaging, if the PU is 250 the price for 250 units, if the PU is 300 the price for 300 units.

Price with price key representation (PSL):
The price always applies to a quantity ruled through the price key:
Price for 1 unit
Price for 100 units
Price for 1000 units
The quantity shows the number of pieces or units of measure contained in the order or delivery for the respective article.
In contrast to sales packaging and secondary packaging, the disposal costs for chemical-technical products are shown separately. The breakdown of the individual costs can be found on the relevant products and also in the shopping cart, as well as in our General Terms and Conditions (GTC).

Art.-no.
Cust. Mat. No.

Hazardous Material

Product information

Datasheets()

Datasheets ()

CAD data  | 

Certificates/ Documents

 | 

 | 

Technical information