Assembly power cleaner

Name: Assembly power cleaner
Brand: Würth
SKU: 0890107

Power cleaner for assembly
ASMBYCLNR-POWER-500ML

Art.-no. 0890107

EAN 4038898508236

All versions

Similar products

Prices for customers after login

Assembly power cleaner

Art.-no. 0890107

Prices for customers after login

Quantity

Exclusively for trade customers

Login/Register
Call customer service:

Highly effective special cleaner containing solvents. NSF-certified

High cleaning performance

Ideal for the removal of oily, greasy, sooty, and lightly resinified dirt

Short flash-off time

Fast cleaning with no residue

Short downtime of the machine parts to be treated

No second application required

Good material compatibility

FKM and polymer seals do not swell.

Causes no corrosion on metal surfaces such as iron, steel, stainless steel, aluminium, brass

Spray head with direct jet

Targeted and effective cleaning of contaminated parts

Acetone-, AOX- and silicon-free

Notice

Prior to application, check the compatibility of rubber, plastic parts and painted surfaces on an invisible area.

NSF K1 registered (no.: 150705, 150706), complies with requirements of USDA K1.

The usage instructions are recommendations based on the tests we have conducted and our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and further develop products.

Product information

Würth Catalogue

Datasheets(X)

Safety data sheet

Certificates/ Documents

Application area

For cleaning engine and gear casings, brake systems, vehicle, machine and clutch parts in maintenance, repair and assembly work.

Instructions

Spray the surface to be cleaned and then wipe it thoroughly with a clean cleaning cloth.

Contents	0.5 l
Smell/fragrance	Characteristic
Colour	Transparent
Chemical basis	Naphtha
Density/conditions	0.71 g/cm³ / at 20°C
Min. flashing point	-18 °C
Acetone-free	Yes
Silicone-free	Yes
AOX-free	Yes

Suitable glove:

Product

Description

Nitrile chemical protective glove With cotton velour finish inside

Description:

Permeation level: 5

Nitrile chemical protective glove Long, heavy-duty design

Description:

Permeation level: 6

Permeation is the process by which a chemical moves through the material of a protective glove on a molecular level. The time from the initial contact between the chemical and the glove to the permeation of the material is the breakthrough time.

Measured breakthrough time

Permeation level

< 10 min

≥ 10 min

≥ 30 min

≥ 60 min

≥ 120 min

≥ 240 min

≥ 480 min

Important information:

The information given is based on experience and laboratory conditions and is designed as a guide. However, the actual suitability of a glove depends on the individual conditions of its use and must be confirmed by an appropriate test under operational conditions. Given the variety of materials and chemicals used, the possibility of incompatibility or usage problems for the wearer cannot be excluded in individual cases. We would be happy to advise you about optimum solutions.