Automatic jump starter
Automatic starter up to 12,000 cm³
JUMPSTRT-MOB-JUMPSTART-AUTM-4-12/24V
Register now and access more than 125,000 products
- For mobile, mains-independent jump starting of cars and light commercial vehicles with a 12-V or 24-V electrical system
- Automatic polarity reversal protection
- Automatic voltage selection 12 V/24 V (manual voltage selection also possible)
- Fully insulated, angled solid clamps with highly flexible fully rubberised lines
- Deenergised connection to and disconnection from the vehicle's power system
- Protection against power surges
- Overload protection in start mode
- LED battery status indicator
- Short-circuit protection (internal battery protected using high current fuses)
- Delivery includes metal chassis on large pneumatic tyres (diameter: 300 mm)
Booster for use with the following battery types:
- Open, wet, maintenance-free, VRLA, AGM, GEL, EFB and EFB+, calcium, lithium, NiCd aircraft batteries
Dekra-tested
Datasheets(X)
For all vehicles with 12 V electrical systems and vehicles up to 12,000 cm³ with 24 V electrical systems
Min./max. nominal voltage | 12 / 24 V/DC |
Suitable for max. cubic capacity | 12000 cm³ |
Rechargeable battery/battery capacity | 64 Ah |
Max. current | 5700 A |
Nominal current | 2400 A |
Width x height x depth | 470 x 1000 x 400 mm |
Weight | 38 kg |
Type of rechargeable battery/battery | AGM battery |
Rechargeable battery/battery permanently installed | Yes |
Number of rechargeable batteries/batteries | 4 PCS |
Material of housing | ABS |
Colour | Red |
Type description | Jump starter |
Display | LED |
Last viewed
WÜPLAST® countersunk head screw with hexagon socket WN 1423, steel 10.9, zinc-nickel-plated, transparent passivated (P3E)
Conical countersink yellow/blue ring HSS bit 90° short
Set of 2 arms
Flex LED light strip With silicone sheath
Hexagon Socket Head Cap Screw with centre, with low head DIN 6912, A2-070 stainless steel, plain
Hexagon head bolt DIN EN 14399-4, steel 10.9, hot-dip galvanised (hdg), for high-strength structural bolting assembly
T-distributor, PA6 MOD BS SGA
Hexagon head sealing plug with collar DIN 910, steel, plain
WÜPLAST® pan head screw with flange and Z Phillips head WN 1411, steel 10.9, zinc-plated, transparent passivated (A3K)
Hexagon head bolt DIN EN 14399-4, steel 10.9, hot-dip galvanised (hdg), for high-strength structural bolting assembly