BP-G-H/TZN post support bracket
Post holder, BP-G-H/TZN
POSTHOLD-CONCA-HDG-(FRK80-160)-(210-280)
Register now and access more than 125,000 products
- Wide width adjustment via slotted hole and fixing screw
- To set in concrete
- Material: Steel
- Surface: Fully hot-dip galvanised
Diameter of bolts/screws may only be max. 1 mm smaller than the diameter of the hole.
Secure anchorage of the post support bracket in the substrate or ground must be verified separately.
Datasheets(X)
For fixing light wooden structures such as fence posts, pergolas, carports etc.
Anchored by embedding directly in concrete or using a sleeve foundation.
Recommended concrete embedding depth: approx. 150 mm
Suitable fasteners:
- Bolts: d = M12 mm
- Wood screws: d = 6 mm
 | |
Design | For static purposes |
Form | Fork /U type |
Min./max. width of bracket | 80-160 mm |
Max. width of bracket | 160 mm |
Min. width of bracket | 80 mm |
Fork height | 116 mm |
Fork depth | 80 mm |
Fork thickness | 4 mm |
Holder plate dimensions | 88 x 80 x 6 mm |
Type description | BWG 1 |
Unextended height | 200 mm |
Min./max. height (H) | 200-270 mm |
Baseplate format | 60 x 60 x 4 mm |
Pipe diameter | 42 mm |
Length of rowlock (concrete) | 200 mm |
Diameter of rowlock (concrete) | 42 mm |
Number of D 6 mm holes | 8 PCS |
Number of D 12 mm holes | 2 PCS |
Material | Steel |
Surface | Hot dip galvanized |
Use class | 3 |
Min. recommended depth of encasement in concrete | 150 mm |
Number of pieces | 2 PCS |
Weight | 2236 g |
Select RAL-colour code
!! NOTE: On-screen visualisation of the colour differs from real colour shade!!
Last viewed
System workshop trolley BASIC 8.4
Twist drill bit HSS DIN 338 type RN 130°
Tapered pin, unhardened DIN 1, plain steel, unhardened, design A (ground)
CLIP-O-FLEX® holder Labelflex Dispenser holder for labelling
Occupational shoes
FLEXEN® adhesive For FLEXEN® S2 rubber foam heat insulation, rubber foam refrigeration insulation plus, rubber foam refrigeration insulation, PE, PE stable, compact eccentric block
Work dungarees
ASSY® 4 A2 RCS fittings screw A2 stainless steel plain full thread raised countersunk head
Long 90° elbow with female and male thread EN10242 G4, hot-dip galvanised malleable iron
Low-cut safety shoes, SB