BSD drill rod anchor - DRD-WOALUST-SK-PT-AW40-(RSI)-6,9X213

BSD drill rod anchor - DRD-WOALUST-SK-PT-AW40-(RSI)-6,9X213 - 1

BSD drill rod anchor - DRD-WOALUST-SK-PT-AW40-(RSI)-6,9X213 - 2

BSD drill rod anchor - DRD-WOALUST-SK-PT-AW40-(RSI)-6,9X213 - 3

BSD drill rod anchor - DRD-WOALUST-SK-PT-AW40-(RSI)-6,9X213 - 4

BSD drill rod anchor

Name: BSD drill rod anchor
Brand: Würth
SKU: 5394216213

Drill rod anchor
DRD-WOALUST-SK-PT-AW40-(RSI)-6,9X213

Art.-no. 5394216213

EAN 4046777066609

All versions

Prices for customers after login

BSD drill rod anchor

Art.-no. 5394216213

Prices for customers after login

Quantity

x 50 pcs

Exclusively for trade customers

Login/Register
Call customer service:

Twisting dowel pin with force-pushing UNC thread for steel or aluminium slotted sheet metal connections. High level of corrosion protection due to zinc-flake coating.

Direct screwing into 6 mm thick aluminium extrusion profiles without pre-drilling.

For aluminium thicknesses over 6 mm and steel connections over 4 mm, pre-drill with a diameter of 6 mm

Quick and easy, effort-saving screwing-in thanks to integrated forced feed

High load-bearing capacity and high yield moment thanks to hardened steel quality

Proof of Performance

EN 14592

Notice

The general conditions of EN 14592:2008+A1:2012 and EC5 (EN 1995-1-1:2004 + AC:2006 + A1:2008) must be observed and applied.

EN 14592

Product information

Würth Catalogue

Datasheets(X)

CAD data (available after login)

Certificates/ Documents

Application area

Dowel pins for attaching slotted sheet metal/wood connections made of steel or aluminium.

Instructions

Direct fitting or placement of BSD drill rod anchor when using aluminium extrusion profiles.

In the case of slotted sheet metal connections made of steel or flexible aluminium sheets, pre-drill through the wood and the metal slotted plate with a diameter of 6 mm.

In the case of multi-shear connections and when using wood with a bulk density of more than 350 kg/m³, position a screw clamp perpendicular to the slotted sheet metal to avoid excessive lateral tension on the wooden support during assembly.


Head type	Round washer head
Internal drive	AW40
Head diameter (dh)	18 mm
Head height (dk)	2.5 mm
Diameter (d)	6.93 mm
Length (l)	213 mm
Thread length (lg)	100 mm
Shape of tip	Drilling tip
Material	Hardened steel
Drill tip length	15 mm
Surface	Flake zinc silver
Product weight (per item)	64.000 g
Yield moment	43.5 Nm
Approval	EN 14592

120	6.9 x 113	1	112	56	–	10,3	56	–	7,74
		2	104	17 ≤ t_a ≤ 22	60 ≤ t_i ≤ 70	17,9	≤ 26	≥ 52	12,3
		3	96	≤ 21	≥ 27	16,4	≤ 26	≥ 22	11,3
140	6.9 x 133	1	132	66	–	11,5	66	–	8,46
		2	124	27	70	20,7	20 ≤ t_a ≤ 26	72 ≤ t_i≤ 84	14,8
		3	116	≤ 21	≥ 37	20,1	≤ 26	≥ 32	13,8
160	6.9 x 153	1	152	76	–	12,7	76	–	9,27
		2	144	36	72	21,5	29	86	16,9
		3	136	≤ 21	≥ 47	23,8	≤ 26	≥ 42	16,4
180	6.9 x 173	1	172	86	–	13,0	86	–	10,1
		2	164	46	72	22,3	39	86	17,6
		3	156	≤ 21	≥ 57	27,5	≤ 26	≥ 52	18,9
200	6.9 x 193	1	192	96	–	13,0	96	–	10,8
		2	184	56	72	23,3	49	86	18,1
		3	176	18 ≤ t_a ≤ 21	67 ≤ t_i ≤ 70	31,2	≤ 26	≥ 62	21,4
220	6.9 x 213	1	212	106	–	13,0	106	–	10,8
		2	204	67	70	24,5	59	86	18,7
		3	196	27	71	33,8	13 ≤ t_a ≤ 26	72 ≤ t_i≤ 85	24,0
240	6.9 x 233	1	232	116	–	13,0	116	–	10,8
		2	224	76	72	25,7	26	12	19,5
		3	216	37	71	34,5	23 ≤ t_a ≤ 26	82 ≤ t_i ≤ 85	26,5
The bearing capacities given are for coniferous wood C24 (rk = 350 kg/m³). For other strength classes, the load capacities can be multiplied by the factors in Table 4.
PLEASE NOTE: These are guides for planning purposes. The values must be calculated for each project by authorised persons.

120	6.9 x 113	1	114	57	–	10,4	57	–	7,81
		2	108	20	68	18,6	12 ≥ t_a ≤ 26	56 ≤ t_i≤ 84	12,8
		3	102	≤ 21	≥ 30	17,5	≤ 26	≥ 25	12,1
140	6.9 x 133	1	134	67	–	11,6	67	–	8,54
		2	128	29	70	21,0	24	80	15,3
		3	122	≤ 21	≥ 40	21,2	≤ 26	≥ 35	14,6
160	6.9 x 153	1	154	77	–	12,7	77	–	9,35
		2	148	38	72	21,6	31	86	17,2
		3	142	≤ 21	≥ 50	24,9	≤ 26	≥ 45	17,1
180	6.9 x 173	1	174	87	–	13,0	87	–	10,2
		2	168	48	72	22,5	41	86	17,7
		3	162	11 ≤ t_a ≤ 21	60 ≤ t_i ≤ 70	28,6	≤ 26	≥ 55	19,7
200	6.9 x 193	1	194	97	–	13,0	97	–	10,8
		2	188	58	72	23,5	51	53	18,2
		3	182	21	70	32,3	≤ 26	≥ 65	22,2
220	6.9 x 213	1	214	107	–	13,0	107	–	10,8
		2	208	69	70	24,7	61	86	18,9
		3	202	30	71	34,2	16 ≥ t_a ≤ 26	75 ≤ t_i ≤ 85	24,7
240	6.9 x 233	1	234	117	–	13,0	117	–	10,8
		2	228	78	72	25,8	71	86	19,7
		3	222	40	71	34,8	26	85	27,3
The bearing capacities given are for coniferous wood C24 (rk = 350 kg/m³). For other strength classes, the load capacities can be multiplied by the factors in Table 4.
PLEASE NOTE: These are guides for planning purposes. The values must be calculated for each project by authorised persons.

2	100	15 ≤ t_a ≤ 21	58 ≤ t_i ≤ 70	17,1	≤ 26	≥ 48	11,8
3	90	≤ 21	≥ 24	15,3	≤ 26	≥ 19	10,5
140	6.9 x 133	1	130	65	–	11,3	65	–	8,39
		2	120	25	70	20,3	18 ≤ t_a ≤ 26	68 ≤ t_i ≤ 84	14,3
		3	110	≤ 21	≥ 34	19,0	≤ 26	≥ 29	13,1
160	6.9 x 153	1	150	75	–	12,6	75	–	9,18
		2	140	34	72	21,3	27	86	16,7
		3	130	≤ 21	≥ 44	22,7	≤ 26	≥ 39	15,6
180	6.9 x 173	1	170	85	–	13,0	85	–	10,0
		2	160	44	72	22,1	37	86	17,6
		3	150	≤ 21	≥ 54	26,4	≤ 26	≥ 49	18,1
200	6.9 x 193	1	190	95	–	13,0	95	–	10,7
		2	180	54	72	23,1	47	86	18,0
		3	170	15 ≤ ta ≤ 21	64 ≤ ti ≤ 70	30,1	≤ 26	≥ 59	20,7
220	6.9 x 213	1	210	105	–	13,0	105	–	10,8
		2	200	65	70	24,2	57	86	18,6
		3	190	24	71	33,2	≤ 26	≥ 69	23,2
240	6.9 x 233	1	230	115	–	13,0	115	–	10,8
		2	220	74	72	25,5	26	12	19,3
		3	210	34	71	34,4	20 ≤ ta ≤ 26	79 ≤ ti ≤ 85	25,7
The bearing capacities given are for coniferous wood C24 (rk = 350 kg/m³). For other strength classes, the load capacities can be multiplied by the factors in Table 4.
PLEASE NOTE: These are guides for planning purposes. The values must be calculated for each project by authorised persons.

7	4,38	4,71	4,98	5,21	5,60	5,92	6,20
8	4,94	5,31	5,61	5,88	6,31	6,68	6,99
9	5,49	5,90	6,24	6,53	7,02	7,42	7,77
10	6,04	6,49	6,86	7,18	7,72	8,16	8,54

60	28	70	26
70	26	76	27
80	24	79	28
90	21	80	28

Calculation basis
Sheet steel/wood connections with drill rod anchors are calculated in accordance with EN 1995-1-1 Section 8.6. Characteristic values of drill rod anchors: d = 6.9 mm, M_y,Rk = 43.5 Nmm The rod anchors must be pre-drilled to their nominal diameter and screwed in at one end flush with the surface at an angle of less than 90° to the direction of the grain.
Prerequisites for using the tabulated values
Sheet steel/wood connection with steel plates inside Sheet steel: strength min. S235, minimum sheet thickness 3 mm for sufficient bearing stress capacity of sheet steel with edge distances of e1 ≥ 3 x d0 and e2 ≥ 1.5 x d0. The load/grain angle a is 0° or 90°. The specified load capacities are not valid for other angles. The rod anchors must be arranged perpendicular to the direction of the grain. The rod anchors must be screwed in flush with the surface on one side. The specified thickness of the outer and inner wooden components (ta and ti) must be observed. The bearing capacities given are for coniferous woods with a characteristic bulk density p_k of 350 kg/m³. Connections with rod anchors should contain at least 2 drill rod anchors. Connections using one drill rod anchor only have half the calculated load capacity. The minimum distances in line with EN 1995-1-1 Table 8.5.
PLEASE NOTE: These are guides for planning purposes. The values must be calculated for each project by authorised persons.

Additive article:

Product

Description

Quantity

Price
/PU

Universal holder E 6.3 (1/4) With stainless steel sleeve, snap ring and permanent magnet

HOLD-BIT-SLEV/SNAPRG-MAGN-D11,1MM

Art.-no. 0614176699

x 1 pcs

AW<SUP>®</SUP> C 6.3 bit (1/4 inch) with patented AW tip and colour coding

AW® C 6.3 bit (1/4 inch) with patented AW tip and colour coding

BIT-AW40-LUMINOUSPINK-1/4IN-L25MM

Art.-no. 06145140

x 10 pcs

The packaging unit defines the number of articles in one packaging. In the catalog segment you can choose from different packaging units if a pop-up menu is displayed.

Just leave the field empty if you don't know the packaging unit when directly entering the article number in the shopping basket or when importing with Easy-/VarioScan. The packaging unit will be determined automatically.

The article number is made up of the following: VVVVAAABBB
VVVV = 4 digits for prefix number (please note that the first digit is currently always 0)
AAA = 3 digits for dimension part 1
BBB = 3 digits for dimension part 2

Example article number structures:
Example 1: Screw with dimensions of 4x10 mm:
VVVVAAABBB
00574 10 (2 spaces between the 4 and the 10)

Example 2: Screw with dimensions of 10x20 mm:
VVVVAAABBB
005710 20 (1 space between the 10 and the 20)

Example 3: Flat washer with an internal diameter of 6 mm:
VVVVAAABBB
04076

Price per packaging unit (PU):
The displayed price is always in line with the displayed packaging, if the PU is 250 the price for 250 units, if the PU is 300 the price for 300 units.

Price with price key representation (PSL):
The price always applies to a quantity ruled through the price key:
Price for 1 unit
Price for 100 units
Price for 1000 units

The quantity shows the number of pieces or units of measure contained in the order or delivery for the respective article.

In contrast to sales packaging and secondary packaging, the disposal costs for chemical-technical products are shown separately. The breakdown of the individual costs can be found on the relevant products and also in the shopping cart, as well as in our General Terms and Conditions (GTC).