Welcome to Würth Aerospace Solutions For trade customers only
Ball bearing rails with full pull-out and maximum load of 50 kg - SLID-FX-PIN-50KG-700MM Ball bearing rails with full pull-out and maximum load of 50 kg - SLID-FX-PIN-50KG-700MM Ball bearing rails with full pull-out and maximum load of 50 kg - SLID-FX-PIN-50KG-700MM
Ball bearing rails with full pull-out and maximum load of 50 kg - SLID-FX-PIN-50KG-700MM - 1
Ball bearing rails with full pull-out and maximum load of 50 kg - SLID-FX-PIN-50KG-700MM - 2
Ball bearing rails with full pull-out and maximum load of 50 kg - SLID-FX-PIN-50KG-700MM - 3

Ball bearing rails with full pull-out and maximum load of 50 kg

Ball-bear. rail, full ext., pin mount, max. 50 kg
SLID-FX-PIN-50KG-700MM

Art.-no. 0684510527

EAN 4050382081094

All versions

Individual price display after login
Ball bearing rails with full pull-out and maximum load of 50 kg

Art.-no. 0684510527

Individual price display after login
Quantity
PU

Exclusively for trade customers

Register now and access more than 125,000 products

Pin mount

Soft-close on both sides with the option of adjusting the spring tension


  • Controlled closure in the last 25 mm

  • Prevents involuntary opening of the rail when the drawer is closed


Comfortable access to all the drawer's contents


Over-extension: 29 mm



Exceptional sliding and lateral stability

Notice

The spring's tension can be adjusted to another two levels using the springs themselves. This makes the insertion force more intense at position C and weaker at position A.

Specified dimensions are not binding. The dimensions are subject to possible technical modifications!

Product information

Würth Catalogue

Datasheets(X)

Certificates/ Documents

 | 

 | 

Instructions

The sliding rail can be assembled inside the cabinet using Euro screws. The drawer can be assembled with 3.5 mm diameter ASSY screws.

Nominal length

700 mm

Extension travel (AW)

734 mm

Load capacity at 100,000 cycles

50 kg

Min. temperature conditions

10 °C

Max. temperature conditions

40 °C

Cabinet rail length (LK)

700 mm

Drawer rail length (LS)

668 mm

Distance between mounting holes in cabinet rail (hole 1 to hole 2)

288 mm

Material

Steel

Required accessory:
 
Product
Description
Quantity
PU
Price
/PU
EURO screw countersunk head type A
EURO screw countersunk head type A

SCR-EURO-CS/D8-Z2-(A2K)-6,3X10

Zinc-plated steel, PZ-drive. For the connection of concealed hinges, conventional hinges, extensions and fittings in furniture construction
The packaging unit defines the number of articles in one packaging. In the catalog segment you can choose from different packaging units if a pop-up menu is displayed.

Just leave the field empty if you don't know the packaging unit when directly entering the article number in the shopping basket or when importing with v
The article number is made up of the following: VVVVAAABBB
VVVV = 4 digits for prefix number (please note that the first digit is currently always 0)
AAA = 3 digits for dimension part 1
BBB = 3 digits for dimension part 2

Example article number structures:
Example 1: Screw with dimensions of 4x10 mm:
VVVVAAABBB
00574 10 (2 spaces between the 4 and the 10)

Example 2: Screw with dimensions of 10x20 mm:
VVVVAAABBB
005710 20 (1 space between the 10 and the 20)

Example 3: Flat washer with an internal diameter of 6 mm:
VVVVAAABBB
04076
Price per packaging unit (PU):
The displayed price is always in line with the displayed packaging, if the PU is 250 the price for 250 units, if the PU is 300 the price for 300 units.

Price with price key representation (PSL):
The price always applies to a quantity ruled through the price key:
Price for 1 unit
Price for 100 units
Price for 1000 units
The quantity shows the number of pieces or units of measure contained in the order or delivery for the respective article.
In contrast to sales packaging and secondary packaging, the disposal costs for chemical-technical products are shown separately. The breakdown of the individual costs can be found on the relevant products and also in the shopping cart, as well as in our General Terms and Conditions (GTC).
Additive article:
 
Product
Description
Quantity
PU
Price
/PU
Front panel adjuster
Front panel adjuster

FRONTBLIADJ-F.UFLRGUID

x 20 pcs
The packaging unit defines the number of articles in one packaging. In the catalog segment you can choose from different packaging units if a pop-up menu is displayed.

Just leave the field empty if you don't know the packaging unit when directly entering the article number in the shopping basket or when importing with v
The article number is made up of the following: VVVVAAABBB
VVVV = 4 digits for prefix number (please note that the first digit is currently always 0)
AAA = 3 digits for dimension part 1
BBB = 3 digits for dimension part 2

Example article number structures:
Example 1: Screw with dimensions of 4x10 mm:
VVVVAAABBB
00574 10 (2 spaces between the 4 and the 10)

Example 2: Screw with dimensions of 10x20 mm:
VVVVAAABBB
005710 20 (1 space between the 10 and the 20)

Example 3: Flat washer with an internal diameter of 6 mm:
VVVVAAABBB
04076
Price per packaging unit (PU):
The displayed price is always in line with the displayed packaging, if the PU is 250 the price for 250 units, if the PU is 300 the price for 300 units.

Price with price key representation (PSL):
The price always applies to a quantity ruled through the price key:
Price for 1 unit
Price for 100 units
Price for 1000 units
The quantity shows the number of pieces or units of measure contained in the order or delivery for the respective article.
In contrast to sales packaging and secondary packaging, the disposal costs for chemical-technical products are shown separately. The breakdown of the individual costs can be found on the relevant products and also in the shopping cart, as well as in our General Terms and Conditions (GTC).

Art.-no.
Cust. Mat. No.

Hazardous Material

Product information

Würth Catalogue

Datasheets()

Datasheets ()

CAD data  | 

Certificates/ Documents

 | 

 | 

Technical information
Show all product details