Ball snap catch, press-in
Ball closer to press in
CLSR-BALL-ST-(BRS)-PRESIN-D8MM
Register now and access more than 125,000 products
Specified dimensions not binding. Subject to technical changes.
Datasheets(X)
As the drill hole diameter for each ball snap catch, we recommend a bore that is 0.5 mm smaller than its inner diameter.
 | |
Material | Steel |
Surface | Brass plated |
Diameter | 9 mm |
Drill diameter | 7.5 mm |
Length | 11.7 mm |
Last viewed
O-ring, metric
Tool case with all common tools Assortment of 63 pieces
Tapping screw, raised countersunk head
UV 50 sun protection lotion
Locking bolt on plate MS 5000
3KS Plus profile thumbturn cylinder For keyed alike profile cylinders in original equipment
Storage box with cover
System plate with Isofix connection
System case 4.4.1 transparent
Pan head tapping screw, shape C with AW drive