Ball snap catch, screw-in
Ball closer to turn in
CLSR-BALL-ST-(BRS)-TURNIN-D12MM
Register now and access more than 125,000 products
Specified dimensions not binding. Subject to technical changes.
Datasheets(X)
As the drill hole diameter for each ball snap catch, we recommend a bore that is 0.5 mm smaller than its outer diameter.
 | |
Material | Steel |
Surface | Brass plated |
Diameter | 12 mm |
Drill diameter | 11.5 mm |
Length | 14.5 mm |
Last viewed
Pan head tapping screw, C shape with H recessed head DIN 7983, steel, zinc-plated, blue passivated (A2K), shape C, H cross recess
Hex head screw with shank ISO 4014, steel 8.8, zinc-plated, blue passivated (A2K)
EPS profile double cylinder
Paint tarpaulin HDPE fabric
Counterbore Ruko HSS plain DIN 373 with straight shank and fixed pilot, quality grade: medium for through holes
Pressure reducing valve
Flat washer without chamfer ISO 7089 A2 stainless steel, 200 HV
Sanding roller grid/net Mirka Abranet Ace
Straight cutting ring fitting ISO 8434-1, zinc-nickel-plated steel
Protective glove Fitzner® Ninja® Maxim 47400