Ball valve
Ball valve brass ISO Therm F/F
BALVL-ISOTHER-LEVR-IT/IT-BRS-NI-G2
Register now and access more than 125,000 products
- Medium weight model 2 pieces
- Thread end compliant with DIN EN ISO 228-1
- Full pass
- Screw-in sleeve made of CW617N nickel-plated brass
- Brass ball CW614N hard chrome-plated
- Ball direction: PTFE
- Spindle made of CW614N nickel-plated brass
- Spindle seal: PTFE|O-ring FKM with gland
Datasheets(X)
Water (not according to DVGW DIN 1988), heating, greases, heating diesel lubricating oils, fuels, paints, lacquers, solvents, alkalis, weak alkalis and acids, heating water mixture with glycol.
 | |
Connection thread | IT 2 inch |
Length | 106 mm |
Length 2 | 106 mm |
Product weight (per item) | 1641 g |
Min./max. operating temperature | -20 to 150 °C |
Material | Brass CW617N |
Length of lever | 120 mm |
Colour of lever | Black |
Surface | Nickel plated |
Max. temperature conditions | 150 °C |
Max. operating temperature | 150 °C |
Min. operating temperature | -20 °C |
Nominal pressure PN | 20 |
Last viewed
Hex head screw with shank ISO 4014, steel 8.8U, hot-dip galvanised
Work jacket
Hexagonal bolt with pin and small hexagon
Hex head screw with shank ISO 4014, steel 8.8, zinc-plated, blue passivated (A2K)
Hexalobular-socket cylinder head screw, low head
Hexagon nut with fine thread
Threaded rod
Work trousers
Hexagonal bolt with shank
Divider assortment With compartment rails and compartment dividers for system dimensions 16.8