Ball valve
Ball valve KFE M/M heavy-duty design
BALVL-KFE-HDUT-ET/ET-BRS-NI-G1/2XG3/4
Register now and access more than 125,000 products
- Heavy-duty design, 2 pieces [industrial design]
- Thread end according to DIN EN ISO 228-1
- Brass chain and cap
- Chrome-plated brass CW614N ball
- Ball seal: PTFE
- Nickel-plated brass CW614N spindle
- Graphite spindle seal, FKM/FPM o-ring with stuffing box
Datasheets(X)
Water (not according to DVGW DIN 1988), heating, greases, heating oils, diesel oils, lubricating oils, fuels, paints, varnishes, solvents, alkalis, weak alkalis and acids, mixtures of heating water and glycol.
 | |
Connection thread | ET 3/4 inch |
Outlet thread | 0 - not applicable |
Length | 65.5 mm |
Length 2 | 43 mm |
Product weight (per item) | 240.000 g |
Min./max. operating temperature | -20 to 180 °C |
Material | Brass CW617N |
Length of lever | 40 mm |
Colour of lever | Red |
Surface | Nickel plated |
Max. temperature conditions | 180 °C |
Max. operating temperature | 180 °C |
Min. operating temperature | -20 °C |
Material of gasket | 0 - not applicable |
Nominal pressure PN | 32 |
Last viewed
Brake cleaner
Hexagon nut DIN 934, steel I8I, hot-dip galvanised (hdg)
Pneumatic air multi-port distributor, T-piece For installing a compressed air system
Polo shirt
System connector SV 20 E, twin-pin
Compartment divider For steel shelf
Case insert for MASTER/M-CUBE power tools
Clamps
Tapping screw, hexagon head with washer
Quick-mount NPH clip