Ball valve
Ball valve brass M/M with hand lever
BALVLVE-HNDLEVR-ET/ET-BRS-(NI)-G1/2
Register now and access more than 125,000 products
- Medium weight model 2 pieces
- Thread end compliant with DIN EN ISO 228-1
- Full pass
- Screw-in sleeve made of CW617N nickel-plated brass
- Brass ball CW614N hard chrome-plated
- Ball direction: PTFE
- Spindle made of CW614N nickel-plated brass
- Spindle seal: PTFE|O-ring FKM with gland
Datasheets(X)
Water (not according to DVGW DIN 1988), heating, greases, heating diesel lubricating oils, fuels, paints, lacquers, solvents, alkalis, weak alkalis and acids, heating water mixture with glycol.
 | |
Connection thread | ET 1/2 inch |
Length | 69 mm |
Length 2 | 45 mm |
Product weight (per item) | 225.000 g |
Min./max. operating temperature | -20 to 150 °C |
Material | Brass CW617N |
Length of lever | 91 mm |
Colour of lever | Red |
Surface | Nickel plated |
Max. temperature conditions | 150 °C |
Max. operating temperature | 150 °C |
Min. operating temperature | -20 °C |
Nominal pressure PN | 40 |
Last viewed
Hex head screw with shank ISO 4014, steel 8.8, zinc-plated, blue passivated (A2K)
Drawer divider set BASIC, 12-compartment
Hexagonal bolt with thread up to the head
Taper-grooved dowel pin
GEFU® thread-rolling screw With Taptite 2000® thread, flattened half round head with collar and hexalobular drive
AS S3 safety boots
Multi-purpose drill bit MFD-S Plus
Hexagon Socket Head Cap Screw ISO 4762/DIN 912, steel 10.9, plain
Combination screw tap assortment HSCo Multi Performance M3-M10 6 pcs
Slotted countersunk head screw DIN 963, steel 4.8, nickel-plated (E2J)