Ball valve
Ball valve brass F/M with hand lever
BALVLVE-HNDLEVR-IT/ET-BRS-(NI)-G2
Register now and access more than 125,000 products
- Medium weight model 2 pieces
- Thread end in accordance with DIN ISO 228-1
- Full pass
- Screw-in sleeve made of CW617N nickel-plated brass
- Brass ball CW614N hard chrome-plated
- Ball direction: PTFE
- Spindle made of CW614N nickel-plated brass
- Spindle seal: PTFE|O-ring FKM with gland
Datasheets(X)
Water (not according to DVGW DIN 1988), heating, greases, heating diesel lubricating oils, fuels, paints, lacquers, solvents, alkalis, weak alkalis and acids, heating water mixture with glycol.
 | |
Connection thread | ET 2 inch |
Outlet thread | 0 - not applicable |
Length | 115 mm |
Length 2 | 97 mm |
Product weight (per item) | 1610.000 g |
Min./max. operating temperature | -20 to 150 °C |
Material | Brass CW617N |
Length of lever | 154 mm |
Colour of lever | Red |
Surface | Nickel plated |
Max. temperature conditions | 150 °C |
Max. operating temperature | 150 °C |
Min. operating temperature | -20 °C |
Material of gasket | 0 - not applicable |
Nominal pressure PN | 16 |
Last viewed
Top bracket latch for insect protection
Weatherproof trousers
Hex head screw with shank ISO 4014, steel 8.8, zinc-plated, blue passivated (A2K)
Work trousers
Compressed air cleaning gun
Cetus softshell jacket
Serrated locking nut with locking teeth Steel strength class 8, zinc-plated, blue passivated (A2K)
Cylindrical pin, unhardened ISO 2338 M6 A4 stainless steel plain
Manual screw tap, third tap Ruko hand tap HSS DIN 352 Whitworth BSW third tap
Hexagon Socket Head Cap Screw with centre, with low head DIN 6912, steel 8.8, plain