Ball valve
Ball valve KFE M/M w. cap, chain a. hose fitting
BALVLVE-KFE-ET/ET-BRS-(NI)-SLFSEAL-G1/2
Register now and access more than 125,000 products
- Heavy-duty design, 2 pieces
- Thread end according to DIN EN ISO 228-1
- Self-sealing with locking ring
- Nickel-plated brass chain and cap
- Housing: Nickel-plated brass CW617N
- Hose screw connection: Nickel-plated brass CW617N
- Ball: Chrome-plated brass CW614N
- Ball seal: PTFE
- Spindle: Nickel-plated brass CW614N
- Wedge seal: EPDM
Datasheets(X)
Water (not according to DVGW DIN 1988), heating, greases, heating oils, diesel oils, lubricating oils, fuels, paints, varnishes, solvents, alkalis, weak alkalis and acids, mixtures of heating water and glycol.
 | |
Connection thread | ET 1/2 inch |
Length | 81 mm |
Length 2 | 39 mm |
Product weight (per item) | 210 g |
Min./max. operating temperature | 0 to 120 °C |
Material | Brass CW617N |
Length of lever | 46 mm |
Colour of lever | Red |
Surface | Nickel plated |
Max. temperature conditions | 120 °C |
Max. operating temperature | 120 °C |
Min. operating temperature | 0 °C |
Material of gasket | Ethylene propylene diene terpolymer rubber |
Nominal pressure PN | 16 |
Last viewed
Three-way L-distributor
W-VD-A/S anchor rod for W-VPZ and W-VD bonded anchor capsule systems and WIT injection systems in concrete, zinc-plated steel
Rubber grommets made of polychloroprene rubber Insulating sleeves CR
Push-in divider For professional and basic boltless racks
Hexagonal bolt with flange DIN 6921, steel 8.8, zinc-plated, blue passivated (A2K)
Hex head screw with thread up to head ISO 4017, A2-70 stainless steel, plain
ASSY® 4 CS fittings screw Steel zinc plated full thread countersunk head
Bearing shim washer
Blind rivet, flat head
Disc spring for ball bearing