Ball valve
Ball valve KFE M/M w. cap, chain a. hose fitting
BALVLVE-KFE-ET/HF-BRS-(NI)-SLFSEAL-G1/2
Register now and access more than 125,000 products
- Heavy-duty design, 2 pieces
- Thread end according to DIN EN ISO 228-1
- Self-sealing with locking ring
- Nickel-plated brass chain and cap
- Housing: Nickel-plated brass CW617N
- Hose screw connection: Nickel-plated brass CW617N
- Ball: Chrome-plated brass CW614N
- Ball seal: PTFE
- Spindle: Nickel-plated brass CW614N
- Wedge seal: EPDM
Datasheets(X)
Water (not according to DVGW DIN 1988), heating, greases, heating oils, diesel oils, lubricating oils, fuels, paints, varnishes, solvents, alkalis, weak alkalis and acids, mixtures of heating water and glycol.
 | |
Connection thread | ET 1/2 inch |
Length | 81 mm |
Length 2 | 39 mm |
Product weight (per item) | 210.000 g |
Min./max. operating temperature | 0 to 120 °C |
Material | Brass CW617N |
Length of lever | 46 mm |
Colour of lever | Red |
Surface | Nickel plated |
Max. temperature conditions | 120 °C |
Max. operating temperature | 120 °C |
Min. operating temperature | 0 °C |
Material of gasket | Ethylene propylene diene terpolymer rubber |
Nominal pressure PN | 16 |
Last viewed
Threaded fitting
Safety shoes, S1
Sidewall made from solid sheet metal
Heavy-duty floor marking Footprint
Adjusting ring, type A
Ducting clamp Part 1 – Light series
Low-cut safety shoes, S1P
Twist drill bit HSCo DIN 338 Type RN MFD VARIO
Hexagonal bolt with thread up to head ISO 4017, steel strength class 8.8, zinc-nickel-plated, silver (ZNSHL)
Safety sandals, S1