Base element for tension anchors, two pieces
Base element of two-piece tension anchor
TENSANC-2PCE-HTA-2PV-155X63X60X3,0MM
Register now and access more than 125,000 products
- Ideal for a range of installation situations due to a variety of combination possibilities with the respective backplate
- Covers various requirements for load removal or bolt hole spacing due to different geometries
- Pre-production in factory possible, such as assembly of the backplate or complete panelling and completion of internal walls
- Also suitable for wall panels with a pre-fabricated installation level and associated larger bolt hole spacing
- High tensile capacities
No damage to wall elements during transport and reduced risk of injury from non-protruding parts
CE labelling as per European Technical Assessment ETA-14/0274
Datasheets(X)
- Preassembly of the backplate with anchor nails or joist hanger screws in the factory
- Final assembly of the base element using pias® screws for connecting to the backplate and fixing bolt anchors or concrete screws for anchoring in the ground on the construction site
- It is also possible to adjust the height easily and quickly on the construction site
 | |
Type description | HTA-2PV |
Width x height x depth | 60 x 155 x 63 mm |
Width | 60 mm |
Height | 155 mm |
Thickness | 3 mm |
Number of holes in subcarrier nJ + main carrier nH | 6 + 1 PCS |
Number of holes | 7 PCS |
Approval | ETA-14/0274 |
Select RAL-colour code
!! NOTE: On-screen visualisation of the colour differs from real colour shade!!
Last viewed
Power pack LI-CV 18 V with charger and 2 x batteries
Stud with threaded end ≈ 1.25 d DIN 939, steel 10.9, plain
Label carrying system for identification rings
Blanking plug for rubber module
Universal retaining system
Taper-grooved dowel pin ISO 8745 steel plain
Stud with threaded end ≈ 1.25 d
Hexagonal nut
Stud with threaded end ≈ 1.25 d DIN 939, A4 stainless steel, plain
Flat washer without chamfer ISO 7089 A2 stainless steel, 200 HV