Battery terminal grease

Name: Battery terminal grease
Brand: Würth
SKU: 08901041

Battery terminal grease
BTRYTRMLGRSE-TUBE-RED-100ML

Art.-no. 08901041

EAN 4053479221663

All versions

Similar products

Prices for customers after login

Battery terminal grease

Art.-no. 08901041

Prices for customers after login

Quantity

Exclusively for trade customers

Login/Register
Call customer service:

Adhesive, water-resistant red paste provides long-term protection against oxidation for battery terminals and terminals.

Easy to convey

Water-repellent

Application temperature: -30 °C to +60 °C

Dielectric

The usage instructions are recommendations based on the tests we have conducted and on our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting with deliberate intent. We ensure the consistent quality of our products. We reserve the right to make technical changes and further develop products.

Product information

Würth Catalogue

Datasheets(X)

Safety data sheet

Certificates/ Documents

Instructions

Clean the battery terminal thoroughly by mechanical means. Then apply and spread the battery terminal grease.

Contents	100 ml
Colour	Red
Smell/fragrance	Hydrocarbon
Shelf life from production	36 Month
Density	0.93 g/cm³
Density conditions	at 20°C
Min. temperature conditions	-30 °C
Max. temperature conditions	85 °C

Suitable glove:

Product

Description

Nitrile chemical protective glove With cotton velour finish inside

Description:

Permeation level: 6

Nitrile chemical protective glove Long, heavy-duty design

Description:

Permeation level: 6

Permeation is the process by which a chemical moves through the material of a protective glove on a molecular level. The time from the initial contact between the chemical and the glove to the permeation of the material is the breakthrough time.

Measured breakthrough time

Permeation level

< 10 min

≥ 10 min

≥ 30 min

≥ 60 min

≥ 120 min

≥ 240 min

≥ 480 min

Important information:

The information given is based on experience and laboratory conditions and is designed as a guide. However, the actual suitability of a glove depends on the individual conditions of its use and must be confirmed by an appropriate test under operational conditions. Given the variety of materials and chemicals used, the possibility of incompatibility or usage problems for the wearer cannot be excluded in individual cases. We would be happy to advise you about optimum solutions.