Blade connector Uninsulated
Blade connector
TABCON-DTN-(PL)-2,8X0,5-(1,0-1,5SMM)
Register now and access more than 125,000 products
Datasheets(X)
Design | Unsealed |
Min./max. wire cross section | 1-1.5 mm² |
Nominal size of flat plug/push connector/blade connector | 2.8 x 0.5 mm |
Number of locking lugs | 1 PCS |
Diameter of hole | 1.2 mm |
Material | Brass |
Surface | Plain |
Last viewed
Support clip, type BA
Hexagon socket set screw with ring cutter ISO 4029, steel 45H, zinc-plated, blue passivated (A2K)
GEFU® thread-rolling screw With Taptite 2000® thread, flat head and hexalobular drive
ASME B18.5 steel A307 A zinc plated
Clamping pin/clamping sleeve, slotted, heavy-duty design ISO 8752 spring steel plain
Machinist's hammer German design in accordance with DIN 1041
Universal protector W.TEC® COVER CAP WP 600 Polyethylene, red
Hexagon nut, low profile with fine thread DIN 439, A2 stainless steel, plain
ISO insert holder with D clamping system for SN indexable inserts
Hexagonal bolt with thread up to the head ISO 4017, steel 8.8, zinc-plated, blue passivated (A2K)