Blind-hole machine taps Ruko M DIN 376 HSCo VAP form C
MATAP-RUKO-233120VA-CO5-M12X1,75MM
Art.-no. 1971004283
EAN 4007140129321
Register now and access more than 125,000 products
The thread is cut in one operation.
"Vaporising" refers to the evaporation of a non-metallic oxide layer. Vaporising acts as a separating layer and reduces the formation of cold welds. Cold welds involve chips of material that weld onto the edge of the screw tap and damage the thread produced. The consequences of cold welds are torn and unclean thread edges. VAP improves the adhesion of lubricants to the tool surface.
Datasheets(X)
For through threads and blind hole threads, in unalloyed and alloyed steels up to 1000 N/mm² strength, VA metals.
Thread type | Metric thread |
Thread type x nominal diameter | M12 |
Pitch | 1.75 mm |
Length | 110 mm |
Shank diameter | 9.0 mm |
DIN | 376 |
Surface | Plain |
Form | C |
Core hole diameter | 10.20 mm |
Last viewed
Hexagon head bolt with thread up to head DIN 933, 8.8 steel with silver zinc-flake coating (ZFSHL)
S1 safety shoe Steitz Pinus
Low-cut safety shoes, S2 Uvex 2 xenova® 9508
Low-cut safety shoes S1P Steitz VD PRO 1100 VF
Work jacket Kübler Activiq 1250 5365
FLEXEN rubber foam refrigeration insulation 2 m tubing
Protective chainsaw glove
Hexagon Socket Head Cap Screw ISO 4762, 10.9 steel with silver zinc-flake coating (ZFSHL)
Hexagonal bolt with thread up to the head ISO 4017, zinc plated 10.9 steel with thick-layer passivation (VZD)
Connector, pneumatic