Blind-hole machine taps Ruko M DIN 376 HSCo VAP form C
MATAP-RUKO-233180VA-CO5-M18X2,50MM
Art.-no. 1971004286
EAN 4007140129352
Register now and access more than 125,000 products
The thread is cut in one operation.
"Vaporising" refers to the evaporation of a non-metallic oxide layer. Vaporising acts as a separating layer and reduces the formation of cold welds. Cold welds involve chips of material that weld onto the edge of the screw tap and damage the thread produced. The consequences of cold welds are torn and unclean thread edges. VAP improves the adhesion of lubricants to the tool surface.
Datasheets(X)
For through threads and blind hole threads, in unalloyed and alloyed steels up to 1000 N/mm² strength, VA metals.
Last viewed
Twist drill bit HSS DIN 338 type RN 118°
Work trousers Kübler Vita Mix 2L46 5365
Square neck bolt with short pin DIN 479, plain 08.8 steel
Multi-range clamp
Premium preformed 3M breathing mask
ASSY® 3.0, blue galvanised Piano hinge screw
2-component cement-based sealant
Hexagonal bolt with threading up to head ISO 4018, blue passivated zinc plated 4.6 steel (A2K)
System assortment 4.4.1, circlip pliers 4 pieces
1/2 inch power extension with 1/2 inch square drive and ball lock