Blind rivet, closed, with break mandrel and countersunk head ISO 15974, sleeve: aluminium, mandrel: steel
ISO 15974 countersunk head aluminium/steel
RIV-ISO15974-ALU/ST-(5,5-8,0)-3,2X12,5
Register now and access more than 125,000 products
The dimensions and tolerances defined in EN ISO 15974 must be observed.
Tensile and shear forces in accordance with ISO 15974
Datasheets(X)
CAD data (available after login)
 | |
Nominal diameter (d1) | 3.2 mm |
Length (l1) | 12.5 mm |
Head diameter (dk) | 6.7 mm |
Head height (k1) | 1.3 mm |
Material of sleeve | Aluminium |
Material of mandrel | Steel |
Surface of the sleeve | Plain |
Surface of the mandrel | Plain |
Min./max. grip range | 5.5-8.0 mm |
Drill hole diameter | 3.3 mm |
Shear-fracture load | 1100 N |
Tensile fracture load | 1450 N |
Head type | Countersunk head 120 degree |
Last viewed
Pipe nipple EN1254, gunmetal, 3530R
Wire cable 1 x 19 A4 stainless steel
Countersunk head screw with H cross recess ISO 7046-2, A2-70 stainless steel, plain
Rigid connector For flexible LED strips
Countersunk head screw with recessed head, H DIN 965, A2 stainless steel, plain
ASSY® 4 SCS piano hinge screw Steel brass-plated full thread small countersunk head
Twist drill bit, metal Ruko DIN 338 TL 3000 HSS-G plain 130°
STARLINE® Plus trousers
Hexagonal bolt with thread up to the head ISO 4017, A4-70 stainless steel, plain
Hexagonal bolt with shank for pressure container construction ISO 4014, steel 5.6, plain