Blind rivet, open, with break mandrel and countersunk head ISO 15978, countersunk head, aluminium/steel
ISO 15978 aluminium/steel zinc ptd. counters. head
RIV-ISO15978-L-ALU/ST-(2,0-3,5)-3,2X6
Register now and access more than 125,000 products
Sleeve: Plain aluminium; pin: Zinc-plated steel, blue passivated
The dimensions and tolerances defined in EN ISO 15978 must be observed.
Datasheets(X)
CAD data (available after login)
 | |
Nominal diameter (d1) | 3.2 mm |
Length (l1) | 6 mm |
Head diameter (dk) | 6.7 mm |
Head height (k1) | 1.3 mm |
Material of sleeve | Aluminium |
Material of mandrel | Steel |
Surface of the sleeve | Plain |
Surface of the mandrel | Zinc plated |
Min./max. grip range | 2.0-3.5 mm |
Drill hole diameter | 3.3 mm |
Shear-fracture load | 500 N |
Tensile fracture load | 700 N |
Nominal diameter x length (Ø d x l) | 3.2 x 6 mm |
Head type | Countersunk head 120 degree |
Head angle | 120 Degree |
Last viewed
Slotted cheese head DIN 84, A4 stainless steel, plain
Article sticker
Metric ratchet combination wrench with POWERDRIV®
Frame for VS TAL Larder wall cupboard full pull-outs
Digital goniometer DWM 350
Slotted cheese head DIN 84, steel 4.8, plain
Pan Head screw with hexalobular head ISO 14583, A4-70 stainless steel, plain
EPS profile thumbturn cylinder for keyed alike systems with original equipment
Hexagonal bolt
High-visibility jacket