Blind rivet, open, with break mandrel and countersunk head ISO 15978, countersunk head, aluminium/steel
ISO 15978 aluminium/steel zinc ptd. counters. head
RIV-ISO15978-L-ALU/ST-(5,0-7,0)-3,0X10
Register now and access more than 125,000 products
Sleeve: Plain aluminium; pin: Zinc-plated steel, blue passivated
The dimensions and tolerances defined in EN ISO 15978 must be observed.
Datasheets(X)
CAD data (available after login)
 | |
Nominal diameter (d1) | 3 mm |
Length (l1) | 10 mm |
Head diameter (dk) | 6.3 mm |
Head height (k1) | 1.3 mm |
Material of sleeve | Aluminium |
Material of mandrel | Steel |
Surface of the sleeve | Plain |
Surface of the mandrel | Zinc plated |
Min./max. grip range | 5.0-7.0 mm |
Drill hole diameter | 3.1 mm |
Shear-fracture load | 400 N |
Tensile fracture load | 550 N |
Nominal diameter x length (Ø d x l) | 3 x 10 mm |
Head type | Countersunk head 120 degree |
Head angle | 120 Degree |
Last viewed
Sealing plug W.TEC® COVER CAP WP 300 F Polyethylene, natural
TX bit C 6.3 (1/4 inch) with hole
3KS Plus profile thumbturn cylinder For keyed alike profile cylinders in original equipment
Shelf connector For corner boltless rack
Hexagonal bolt with thread up to the head
Adhesive lubricant HHS 2000®
Welded stud
Welding helmet with powered air respirator
Flat blade fuses MINI-FLP silver assortment In system case 4.4.1
Hexagonal bolt with shank and fine thread DIN 960, steel 10.9, zinc-plated, blue passivated (A2K)