Blind rivet, open, with break mandrel and countersunk head ISO 15980, countersunk head, steel/steel
ISO 15980 steel zinc ptd./steel zinc ptd. cs head
RIV-ISO15980-ST/ST-(11,0-15,0)-4,8X20,0
Register now and access more than 125,000 products
Sleeve: Zinc-plated steel; mandrel: Zinc-plated steel, blue passivated
The dimensions and tolerances defined in EN ISO 15980 must be observed.
Datasheets(X)
CAD data (available after login)
 | |
Nominal diameter (d1) | 4.8 mm |
Length (l1) | 20 mm |
Head diameter (dk) | 10.1 mm |
Min./max. head diameter (dk min./max.) | 8.3-10.1 mm |
Head height (k1) | 2.0 mm |
Material of sleeve | Steel |
Material of mandrel | Steel |
Surface of the sleeve | Zinc plated |
Surface of the mandrel | Zinc plated |
Min./max. grip range | 11.0-15.0 mm |
Drill hole diameter | 4.9 mm |
Shear-fracture load | 2900 N |
Tensile fracture load | 3100 N |
Nominal diameter x length (Ø d x l) | 4.8 x 20 mm |
Head type | Countersunk head 120 degree |
Head angle | 120 Degree |
Last viewed
Low-cut safety shoes, S1
Flat head tapping screw, type C with hexagon socket ISO 14585, A2 stainless steel, shape C (with tip)
Spring lock washer, shape B DIN 137, spring steel, plain, shape B crimped
Hexagon Socket Head Cap Screw
Twist drill bit, metal Ruko DIN 338 TL 3000 HSS-G plain 130°
Flat blade fuse MICRO 2 Silver
Tipp® VDS sprinkler clamp
Straight male fitting ISO 8434-1, stainless steel 1.4571, metric male thread with seal
Hexagonal bolt with threading up to head
Weatherproof trousers