Blind rivet, open, with break mandrel and countersunk head ISO 15980, countersunk head, steel/steel
ISO 15980 steel zinc ptd./steel zinc ptd. cs head
RIV-ISO15980-ST/ST-(15,0-19,0)-5,0X25,0
Register now and access more than 125,000 products
Sleeve: Zinc-plated steel; mandrel: Zinc-plated steel, blue passivated
The dimensions and tolerances defined in EN ISO 15980 must be observed.
Datasheets(X)
CAD data (available after login)
 | |
Nominal diameter (d1) | 5 mm |
Length (l1) | 25 mm |
Head diameter (dk) | 10.5 mm |
Min./max. head diameter (dk min./max.) | 8.7-10.5 mm |
Head height (k1) | 2.1 mm |
Material of sleeve | Steel |
Material of mandrel | Steel |
Surface of the sleeve | Zinc plated |
Surface of the mandrel | Zinc plated |
Min./max. grip range | 15.0-19.5 mm |
Drill hole diameter | 5.1 mm |
Shear-fracture load | 2900 N |
Tensile fracture load | 3100 N |
Nominal diameter x length (Ø d x l) | 5 x 25 mm |
Head type | Countersunk head 120 degree |
Head angle | 120 Degree |
Last viewed
Self-tapping thread inserts with cutting hole
Hexagonal bolt with thread up to the head DIN 933, steel 8.8, zinc-plated, blue passivated (A2K)
Safety angle grinder SWS 26-230-T
EPS profile double cylinder
REDOSLIDE Z60/100-HS synchronous controller
Plastic frame anchor W-UR 10 XS W-UR 10 XS for use in perforated brick with small chambers and thin webs in conjunction with the AMO Combi screw
Change label
Sundström rubber head strap SR 340
Hexagonal bolt
Safety boots S3