Blind rivet, open, with break mandrel and countersunk head ISO 15980, countersunk head, steel/steel
ISO 15980 steel zinc ptd./steel zinc ptd. cs head
RIV-ISO15980-ST/ST-(5,0-6,5)-3,2X10,0
Register now and access more than 125,000 products
Sleeve: Zinc-plated steel; mandrel: Zinc-plated steel, blue passivated
The dimensions and tolerances defined in EN ISO 15980 must be observed.
Datasheets(X)
CAD data (available after login)
 | |
Nominal diameter (d1) | 3.2 mm |
Length (l1) | 10 mm |
Head diameter (dk) | 6.7 mm |
Min./max. head diameter (dk min./max.) | 5.8-6.7 mm |
Head height (k1) | 1.3 mm |
Material of sleeve | Steel |
Material of mandrel | Steel |
Surface of the sleeve | Zinc plated |
Surface of the mandrel | Zinc plated |
Min./max. grip range | 5.0-6.5 mm |
Drill hole diameter | 3.3 mm |
Shear-fracture load | 1100 N |
Tensile fracture load | 1200 N |
Nominal diameter x length (Ø d x l) | 3.2 x 10 mm |
Head type | Countersunk head 120 degree |
Head angle | 120 Degree |
Last viewed
Hexagon nut
Vehicle cable FLRY
Safety boots, S3
Hexagon socket set screw with ring cutter ISO 4029, A2 stainless steel, 21H, plain
Abrasive flap disc Klingspor SMT 644 Supra
HSS WN type RN double-ended drill bit
Stud with threaded end ≈ 1 d DIN 938, steel 8.8, plain
Designer shelf support
Stud with threaded end ≈ 1.25 d DIN 939, steel 8.8, zinc-plated, blue passivated (A2K)
Cylindrical roller bearing FAG