Blind rivet, open, with break mandrel and countersunk head ISO 15984, countersunk head, A2/A2 stainless steel
ISO 15984 countersunk head stainless steel A2/A2
RIV-ISO15984-A2/A2-(2,5-4,0)-4,8X8,0
Register now and access more than 125,000 products
Sleeve: A2 stainless steel; mandrel: A2 stainless steel
The dimensions and tolerances defined in EN ISO 15984 must be observed.
Datasheets(X)
CAD data (available after login)
 | |
Nominal diameter (d1) | 4.8 mm |
Length (l1) | 8 mm |
Head diameter (dk) | 10.1 mm |
Head height (k1) | 2 mm |
Material of sleeve | Stainless steel A2 |
Material of mandrel | Stainless steel A2 |
Surface of the sleeve | Plain |
Surface of the mandrel | Plain |
Min./max. grip range | 2.5-4.0 mm |
Drill hole diameter | 4.9 mm |
Shear-fracture load | 4000 N |
Tensile fracture load | 5000 N |
Nominal diameter x length (Ø d x l) | 4.8 x 8.0 mm |
Head type | Countersunk head 120 degree |
Head angle | 120 Degree |
Last viewed
Flat washer without chamfer ISO 7089 steel 200 HV, zinc-nickel black (ZNBH)
Heavy-duty side cutters DIN ISO 5749
Mixer nozzle extension WIT-MV
Hexagon socket set screw with ring cutter ISO 4029, steel 45H, zinc-plated, blue passivated (A2K)
Hexagonal bolt with shank ISO 4014, steel 10.9, plain
Flat washer DIN EN ISO 7089, steel, hot-dip galvanised (hdg)
Low-cut safety shoes S3
Centre stop for boltless rack
Feather key, high shape DIN 6885, steel, plain, shape B
Countersunk screw with hexalobular head ISO 14581, steel, strength class 8.8, zinc-nickel-plated, black (ZNBHL)