Blind rivet, open, with break mandrel and countersunk head ISO 15984, countersunk head, A2/A2 stainless steel
ISO 15984 countersunk head stainless steel A2/A2
RIV-ISO15984-A2/A2-(3,0-5,0)-3,0X8,0
Register now and access more than 125,000 products
Sleeve: A2 stainless steel; mandrel: A2 stainless steel
The dimensions and tolerances defined in EN ISO 15984 must be observed.
Datasheets(X)
CAD data (available after login)
 | |
Nominal diameter (d1) | 3 mm |
Length (l1) | 8 mm |
Head diameter (dk) | 6.3 mm |
Head height (k1) | 1.3 mm |
Material of sleeve | Stainless steel A2 |
Material of mandrel | Stainless steel A2 |
Surface of the sleeve | Plain |
Surface of the mandrel | Plain |
Min./max. grip range | 3.0-5.0 mm |
Drill hole diameter | 3.1 mm |
Shear-fracture load | 1800 N |
Tensile fracture load | 2200 N |
Nominal diameter x length (Ø d x l) | 3 x 8 mm |
Head type | Countersunk head 120 degree |
Head angle | 120 Degree |
Last viewed
FLEXEN® cold rubber 2 m hose
EPS profile double cylinder
Raised countersunk head screw with H recessed head DIN 966, steel 4.8, zinc-plated, blue passivated (A2K)
Drawer divider set BASIC, 5-compartment
Hexagon head bolt with shank for pressure container construction (PED) ISO 4014, steel 25CrMo4, plain
Divider assortment Divider assortment with compartment rails and compartment dividers for system dimensions 8.8
GEFU® thread-rolling screw With Taptite 2000® thread, flattened half round head with collar and hexalobular drive
PU foam cleaner PURlogic® Clean
Work vest
Hexagonal bolt with thread up to the head ISO 4017, steel 8.8, zinc-plated, blue passivated (A2K)