Blind rivet, open, with break mandrel and flat head ISO 15977, dome head, aluminium/steel
ISO 15977-L flat head aluminium/steel zinc plated
NT-ISO15977-L-ALU/ST-(4,0-6,0)-3,4X9,0
Art.-no. 51415349
EAN 4066442415501
Register now and access more than 125,000 products
- Standardised "ISO product" with standardised test criteria (see DIN EN ISO 14589)
- Sleeve: Aluminium AlMg 2.5
- Mandrel: Zinc-plated steel, blue passivated (A2K)
The dimensions and tolerances defined in EN ISO 15977-L must be observed.
Tensile forces and shear forces in line with ISO 15977 class L
Datasheets(X)
 | |
Nominal diameter x length (d1 x l1) | 3.4 x 9 mm |
Min./max. grip range | 4-6 mm |
Head diameter (dk) | 7.1 mm |
Head height (k1) | 1.4 mm |
Min./max. drill hole diameter | 3.5-3.6 mm |
Shear-fracture load | 500 N |
Tensile fracture load | 700 N |
Material of sleeve | Aluminium |
Material of mandrel | Steel |
Surface of the sleeve | Plain |
Surface of the mandrel | Zinc plated |
Drill hole diameter | 3.5 mm |
Standards | ISO 15977 |
RoHS-compliant | Yes |
Head type | Dome head |
Last viewed
O1 occupational shoe Uvex 1 sport white NC
SIMPLEX soft-face sledgehammer with plastic/rubber combination
Linch pin DIN 11023, zinc-plated steel, blue passivated (A2K)
Refill set 10 pieces
Knurled thumb screw, high profile DIN 464, steel 5.8, plain
Stepped drill bit, spiral
Low-cut safety shoes, S2 Steitz Ginger
O-ring, metric
Wire end ferrule without plastic sleeve DIN 46228 Part 1
Stud with threaded end ≈ 1.25 d DIN 939, A4 stainless steel, plain