Blind rivet, open, with break mandrel and flat head ISO 15977, dome head, aluminium/steel
ISO 15977-L flat head aluminium/steel zinc plated
RIV-ISO15977-L-ALU/ST-(2,5-4,0)-4,8X8
Register now and access more than 125,000 products
- Standardised "ISO product" with standardised test criteria (see DIN EN ISO 14589)
- Sleeve: Aluminium AlMg 2.5
- Mandrel: Zinc-plated steel, blue passivated (A2K)
The dimensions and tolerances defined in EN ISO 15977-L must be observed.
Tensile forces and shear forces in line with ISO 15977 class L
Datasheets(X)
CAD data (available after login)
 | |
Nominal diameter x length (d1 x l1) | 4.8 x 8 mm |
Min./max. grip range | 2.5-4.0 mm |
Head diameter (dk) | 10.1 mm |
Head height (k1) | 2 mm |
Min./max. drill hole diameter | 4.9-5.0 mm |
Shear-fracture load | 1200 N |
Tensile fracture load | 1700 N |
Material of sleeve | Aluminium |
Material of mandrel | Steel |
Surface of the sleeve | Plain |
Surface of the mandrel | Zinc plated |
Drill hole diameter | 4.9 mm |
Standards | ISO 15977 |
RoHS-compliant | Yes |
Head type | Dome head |
Mandrel diameter (dm) | 2.95 mm |
Last viewed
Safety boots, S3
Hexagonal bolt with shank and fine thread DIN 960, steel 8.8, plain
Hexagonal bolt with thread up to the head ISO 4017, steel 8.8, zinc-plated, blue passivated (A2K)
Flat washer with chamfer DIN EN ISO 7090, steel, hot-dip galvanised (hdg), hardness class 200 HV
Twist drill bit HSS DIN 338 type RW
Securing shackle W-GFIXB 927
Disposable latex glove Nitras Dispatex 8200
Composite plain bush with flange
Raised countersunk head screw with H recessed head DIN 966, steel 4.8, plain
Hexagonal bolt with thread up to the head ISO 4017, steel 10.9, plain