Blind rivet, open, with break mandrel and flat head ISO 15977, dome head, aluminium/steel
ISO 15977-L flat head aluminium/steel zinc plated
RIV-ISO15977-L-ALU/ST-(7,0-9,0)-3,0X12
Register now and access more than 125,000 products
- Standardised "ISO product" with standardised test criteria (see DIN EN ISO 14589)
- Sleeve: Aluminium AlMg 2.5
- Mandrel: Zinc-plated steel, blue passivated (A2K)
The dimensions and tolerances defined in EN ISO 15977-L must be observed.
Tensile forces and shear forces in line with ISO 15977 class L
Datasheets(X)
CAD data (available after login)
 | |
Nominal diameter x length (d1 x l1) | 3 x 12 mm |
Min./max. grip range | 7.0-9.0 mm |
Head diameter (dk) | 6.3 mm |
Head height (k1) | 1.3 mm |
Min./max. drill hole diameter | 3.1-3.2 mm |
Shear-fracture load | 400 N |
Tensile fracture load | 550 N |
Material of sleeve | Aluminium |
Material of mandrel | Steel |
Surface of the sleeve | Plain |
Surface of the mandrel | Zinc plated |
Drill hole diameter | 3.1 mm |
Standards | ISO 15977 |
RoHS-compliant | Yes |
Head type | Dome head |
Mandrel diameter (dm) | 2.0 mm |
Last viewed
Locking system DUAL
ELMO® speed screws Zinc-plated steel, blue, RW slot drive
Short sanding belt Klingspor LS 309 XH
Hexagon nut, low profile with fine thread DIN 439, A4 stainless steel, plain
EPS profile double cylinder
System workshop trolley BASIC 8.4
SC short twist drill bit DIN 6539
EPS profile thumbturn cylinder
Split pin ISO 1234 A2 stainless steel
W-VD-A anchor rod A4 stainless steel