Blind rivet, open, with break mandrel and flat head ISO 15979, dome head, steel/steel
ISO 15979 flat head steel/steel
RIV-ISO15979-ST/ST-A2K-(0,5-3,0)-3,2X6,0
Register now and access more than 125,000 products
Sleeve: Zinc-plated steel; mandrel: Zinc-plated steel, blue passivated
The dimensions and tolerances defined in EN ISO 15979 must be observed.
Datasheets(X)
CAD data (available after login)
 | |
Nominal diameter x length (d1 x l1) | 3.2 x 6 mm |
Min./max. grip range | 0.5-3.0 mm |
Head diameter (dk) | 6.4 mm |
Head height (k1) | 1.0 mm |
Min./max. drill hole diameter | 3.3-3.4 mm |
Shear-fracture load | 1100 N |
Tensile fracture load | 1200 N |
Material of sleeve | Steel |
Material of mandrel | Steel |
Surface of the sleeve | Zinc plated |
Surface of the mandrel | Zinc plated |
Drill hole diameter | 3.3 mm |
Standards | ISO 15979 |
RoHS-compliant | Yes |
Head type | Dome head |
Mandrel diameter (dm) | 2 mm |
Last viewed
Low-cut safety shoes, S1P
Twist drill bit HSS DIN 338 type RN 118°
Hexagonal bolt with shank ISO 4014, steel 10.9, phosphated
Circlip For shafts, standard design, shape A DIN 471, spring steel, phosphated and oiled
SC short twist drill bit DIN 6539
Work dungarees
Sandpaper triangle Useit® Superpad, wood
Crimp cable lug, round connector PVC-insulated
Threaded fitting DIN 976-1 (shape A) with standard metric ISO thread, zinc-plated steel 4.8, blue passivated
Power pack LI-CV 18 V with charger and 2 x batteries