Blind rivet, open, with break mandrel and flat head ISO 15979, dome head, steel/steel
ISO 15979 flat head steel/steel
RIV-ISO15979-ST/ST-A2K-(5,0-6,5)-4,0X10
Register now and access more than 125,000 products
Sleeve: Zinc-plated steel; mandrel: Zinc-plated steel, blue passivated
The dimensions and tolerances defined in EN ISO 15979 must be observed.
Datasheets(X)
CAD data (available after login)
 | |
Nominal diameter x length (d1 x l1) | 4 x 10 mm |
Min./max. grip range | 5.0-6.5 mm |
Head diameter (dk) | 8.0 mm |
Head height (k1) | 1.3 mm |
Min./max. drill hole diameter | 4.1-4.2 mm |
Shear-fracture load | 1700 N |
Tensile fracture load | 2200 N |
Material of sleeve | Steel |
Material of mandrel | Steel |
Surface of the sleeve | Zinc plated |
Surface of the mandrel | Zinc plated |
Drill hole diameter | 4.1 mm |
Standards | ISO 15979 |
RoHS-compliant | Yes |
Head type | Dome head |
Mandrel diameter (dm) | 2.4 mm |
Last viewed
3KS Plus profile thumbturn cylinder For keyed alike profile cylinders in original equipment
Countersunk rivet
M-CUBE bag set with ABS/AFS/APS
Cut protection glove
Die For standard metric ISO thread HSCo Multi Performance
Clamping pin/clamping sleeve, slotted, heavy-duty design ISO 8752 spring steel plain
Straight male fitting ISO 8434-1, stainless steel 1.4571, tapered BSPT male thread
Edge strip For the end profile of the Premium rubber anti-fatigue mat
Countersunk slotted head screw, Z DIN 965, steel 4.8, zinc-plated, blue passivated (A2K)
Slotted flat-head screws with small head DIN 920, A1 stainless steel, plain