Blind rivet, open, with break mandrel and flat head ISO 15981, dome head, aluminium/aluminium
ISO 15981 flat head aluminium/aluminium
RIV-ISO15981-ALU/ALU-(5,0-7,0)-3,2X10,0
Register now and access more than 125,000 products
- Standardised "ISO product" with standardised test criteria (see DIN EN ISO 14589)
- Sleeve: Plain aluminium
- Mandrel: Plain aluminium
The dimensions and tolerances defined in EN ISO 15981 must be observed.
Datasheets(X)
 | |
Nominal diameter x length (d1 x l1) | 3.2 x 10 mm |
Min./max. grip range | 5.0-7.0 mm |
Head diameter (dk) | 6.7 mm |
Head height (k1) | 1.3 mm |
Min./max. drill hole diameter | 3.3-3.4 mm |
Shear-fracture load | 500 N |
Tensile fracture load | 670 N |
Material of sleeve | Aluminium |
Material of mandrel | Aluminium |
Surface of the sleeve | Plain |
Surface of the mandrel | Plain |
Drill hole diameter | 3.3 mm |
Standards | ISO 15981 |
RoHS-compliant | Yes |
Head type | Dome head |
Mandrel diameter (dm) | 2.1 mm |
Last viewed
Hexagonal bolt with shank SB FITTINGS DIN EN 15048-1 ISO 4014, steel 8.8U, hot-dip galvanised, with nut ISO 4032
GEFU® thread-rolling screw With Taptite 2000® thread, flat head and hexalobular drive
Thread-rolling screw
RW® bit
Threaded rod
Wire rope clamp DIN 741, zinc-plated steel
Hole saw Ruko tungsten carbide multigrade hole saw
GEFU® thread-rolling screw With Taptite 2000® thread, countersunk head with hexalobular drive
Half-length taper grooved pin ISO 8745 A1 stainless steel plain
Hercules S3 safety shoe