Blind rivet, open, with break mandrel and flat head ISO 15983, dome head, A2/A2 stainless steel
ISO 15983 flat head A2 stainless steel/A2
RIV-ISO15983-A2/A2-(0,5-3,0)-3,2X6,0
Register now and access more than 125,000 products
- Standardised "ISO product" with standardised test criteria (see DIN EN ISO 14589)
- Sleeve: A2 stainless steel
- Mandrel: A2 stainless steel
The dimensions and tolerances defined in EN ISO 15983 must be observed.
Datasheets(X)
 | |
Nominal diameter x length (d1 x l1) | 3.2 x 6 mm |
Min./max. grip range | 0.5-3.0 mm |
Head diameter (dk) | 6.7 mm |
Head height (k1) | 1.3 mm |
Min./max. drill hole diameter | 3.3-3.4 mm |
Shear-fracture load | 1900 N |
Tensile fracture load | 2500 N |
Material of sleeve | Stainless steel A2 |
Material of mandrel | Stainless steel A2 |
Surface of the sleeve | Plain |
Surface of the mandrel | Plain |
Drill hole diameter | 3.3 mm |
Standards | ISO 15983 |
RoHS-compliant | Yes |
Head type | Dome head |
Mandrel diameter (dm) | 2.15 mm |
Last viewed
Sanding disc film Klingspor FP 73 WK
Short sanding belt Klingspor LS 309 XH
Threaded rod DIN 976, steel 4.8, plain, shape A
Swivel hoist ring QC 8
pias® drilling screw with hexagon head and drill tip Case-hardened steel, zinc-plated, blue passivated
G-fuse 5x20
Hook For square holes in perforated plates, workshop trolleys and the ORSY®1 shelving systems
Hexagon socket set screw with pin ISO 4028, A4 stainless steel, 21H, plain
Hexagonal bolt with shank SB FITTINGS DIN EN 15048-1 ISO 4014, steel 8.8U, hot-dip galvanised, with nut ISO 4032
Cutting disc Klingspor A 60 TZ Special