Blind rivet, open, with break mandrel and flat head ISO 15983, dome head, A2/A2 stainless steel
ISO 15983 flat head A2 stainless steel/A2
RIV-ISO15983-A2/A2-(8,5-10,5)-3,0X14,0
Register now and access more than 125,000 products
- Standardised "ISO product" with standardised test criteria (see DIN EN ISO 14589)
- Sleeve: A2 stainless steel
- Mandrel: A2 stainless steel
The dimensions and tolerances defined in EN ISO 15983 must be observed.
Datasheets(X)
 | |
Nominal diameter x length (d1 x l1) | 3 x 14 mm |
Min./max. grip range | 8.5-10.5 mm |
Head diameter (dk) | 6.3 mm |
Head height (k1) | 1.3 mm |
Min./max. drill hole diameter | 3.1-3.2 mm |
Shear-fracture load | 1800 N |
Tensile fracture load | 2200 N |
Material of sleeve | Stainless steel A2 |
Material of mandrel | Stainless steel A2 |
Surface of the sleeve | Plain |
Surface of the mandrel | Plain |
Drill hole diameter | 3.1 mm |
Standards | ISO 15983 |
RoHS-compliant | Yes |
Head type | Dome head |
Mandrel diameter (dm) | 2.05 mm |
Last viewed
Low-cut safety shoes, S2
Clips and clamps assortment Universal 460 pcs in system case 4.4.1
Disposable loop key fob
Abrasive flap disc Klingspor SMT 926 Special
Extension rod high-quality for reaching distant spots
Twist drill bit HSS DIN 338 type RN 118°
Hexagon Socket Head Cap Screw ISO 4762/DIN 912, steel 10.9, zinc-plated, blue passivated (A2K)
Oil drain plug
Countersunk head screw with recessed head, H ISO 7046-1, steel 4.8, zinc-nickel-plated, black (ZNBHL)
Charger 12 volt AL 40-LI For rechargeable battery LI 10.8 volt and 12 volt