Bodywork pull clamp 90° angled down
Bodywork pull clamp, angled 90 degree
PULCLMP-BDYWRK-90DGR-ANGLD
Register now and access more than 125,000 products
- The special design allows access to areas where conventional tension clamps cannot be placed (e.g. recesses in longitudinal beams, lock holes, headlight openings etc.).
- Jaws positioned at right angles to the pull direction, fixed to the component with non-slip properties using the clamping screw.
- The fixed pulling eye can be connected with a slide hammer or a chain using hooks.
Datasheets(X)
Product weight (per item) | 1357.200 g |
Last viewed
Clamping rods For airline profiles
FLEXEN® adhesive For FLEXEN® S2 rubber foam heat insulation, rubber foam refrigeration insulation plus, rubber foam refrigeration insulation, PE, PE stable, compact eccentric block
Sabre saw blade, three stars multiblade
Flat cover cap, for hexalobular socket and AW drive
HPT extra-short twist drill bit DIN 1897
Clamping rods For airline profiles
Flat cover cap, for hexalobular socket and AW drive
Flat washer with chamfer DIN EN ISO 7090, steel, hot-dip galvanised (hdg), hardness class 200 HV
BoxSok™ bolt socket head
Steel enclosed tape measure With 3:1 crank ratio for retracting the tape three times faster