Bodywork pull clamp Basic
Bodywork pull clamp, basic type
PULCLMP-BDYWRK-TYPE-BASIC-2PULDIRECT
Register now and access more than 125,000 products
- The two pulling eyes allow straightening jobs in two pull directions at the same time.
- The jaws are fixed to the component with non-slip properties using the clamping screw. The retention force of the jaws is automatically increased through the linear pulling action (clamping cone).
- The pulling eyes can be connected with a slide hammer or a chain using hooks.
Datasheets(X)
Product weight (per item) | 2286.200 g |
Width | 43 mm |
Length | 220 mm |
Last viewed
Universal electrician's tool case 38 pieces
W-TEC® INSERT COIL — tang break-off tool
Slotted set screw with truncated cone ISO 4766, brass, plain
Plastic holder For double open-end wrench assortment
ASSY® 4 COMBI timber screw Steel zinc plated partial thread hexagon head
Terminal board holder For workshop trolleys
System case 4.4.2
Brass, metric lock nut in accordance with EN 60423 for EMC cable glands
Partial exoskeleton Ottobock CX Cool Sleeves cool sleeve arm
Threaded rod DIN 976-1 (shape A) with standard metric ISO thread, zinc-plated steel 8.8, blue passivated (A2K)