Bonded seal
Steel zinc plated not self-centring inch
RG-SEAL-TAPER-HOLE1/2IN-4X17X4MM
Register now and access more than 125,000 products
- For high pressure, vacuum and at high and low temperatures
- Optimum sealing effect due to precisely defined lip formation
- No pressing out, even under extreme pressure conditions thanks to metal-metal contact
Fast and easy installation
- Metal surface requires no special processing
- Minimal tightening torque
- No retightening of installed seal
- Rubber seal hardness: 70 ± 5 Shore
Primarily used with metric hexagon bolts in accordance with German DIN standard) and flange connections
Overhead installation possible. Can be used multiple times
Internal diameter (d1) | 4 mm |
Outer diameter (d2) | 17 mm |
Thickness (h1) | 4 mm |
Material | EPDM (ethylene propylene diene monomer rubber) |
Datasheets(X)
Last viewed
Work trousers
Hammer drill bit For large hammer drills with high impact energy
Key, high profile DIN 6885, steel, plain, shape AB
Reserve taper grooved dowel pin ISO 8741 steel plain
Thread former For W.TEC® INSERT COIL helical inserts - made of HSCo; shape C
Connecting technology
Hexagon nut, low profile, with clamping piece (non-metal insert) DIN 985, steel I6I/I8I, zinc-plated, blue passivated (A2K)
Hexagon head bolt with shank and fine thread ISO 8765, steel 10.9, plain
Low-cut safety shoes S3
EPS profile double cylinder
