Bonded seal
Steel zinc plated not self-centring
WSH-SCRSEAL-SELFCENT-(RBR)-(A2K)-M10
Register now and access more than 125,000 products
- Galvanised steel, blue passivated (A2K)
- Steel washer with moulded-on rubber sealing lip; for sealing bolt heads (primarily used with metric hexagon bolts in accordance with German DIN standard) and flange connections.
- For high pressure, vacuum and broad temperature ranges
- Optimum sealing effect due to precisely defined lip formation
- No pressing out, even under extreme pressure conditions thanks to metal-metal contact
- Minimal tightening torque
- No retightening of installed seal
- Replaces other previously used seals
- Can be used several times
- Quick, easy and reliable installation
- Overhead installation possible
- No special machining of metal surface required
- Temperature resistant from –35°C to +120°C
- Hardness of rubber seal: 70 ± 5 Shore
Professional installation:
It is recommended that a centring recess is provided for the sealing washer to prevent the seal being placed in an eccentric position.
Datasheets(X)
 | |
Suitable for screw | M10 |
Internal diameter (d1) | 11.2 mm |
Outer diameter (d2) | 19.1 mm |
Thickness (h1) | 1.5 mm |
Material | Steel |
Surface | Zinc plated |
Last viewed
System insert 4.4.1, TX socket wrench 1/2 inch
Hole puncher with splitting punch Metric ISO sizes in accordance with EN 50262
Locking system DUAL
Hand tap set/kit inch Ruko hand tap HSS DIN 352 UNC 3 pieces
Breathing mask disposable 3M 8710E
Safety boots, S2
Stone drill bit combi assortment FS 13 pieces
VARIFIX® T-shaped rail connector
Combination wrench, inch with POWERDRIV®
Work jacket