Bottom bracket latch for insect protection
Corner connecting plate, down
CRNCONPLT-F.INSPROT-DWN-SCRABL-26MM
Register now and access more than 125,000 products
Scope of delivery:
- 2 x A2 bracket latches
Not suitable for FSR with spring-loaded bracket latches.
The offset is worked out as follows:
Folding dimensions in mm (panel frame thickness)
+ visible brush (depending on model)
+ brush channel (depending on model)
= offset (in mm)
Specified dimensions not binding. Subject to technical changes!
Datasheets(X)
For FSR with hook-in assembly
 | |
Cranking (a) | 26 mm |
Material | Stainless steel A2 |
Last viewed
Half-head strip nail, 34°, with smooth shaft Steel, zinc-plated yellow (A4C), free from chromium VI
Hexagonal bolt with shank SB FITTINGS DIN EN 15048-1 ISO 4014, steel 8.8U, hot-dip galvanised, with nut ISO 4032
Hexagonal bolt with thread up to head ISO 4017, steel 10.9, zinc-plated thick-film passivated (ZSML)
GEFU® thread-rolling screw With Taptite 2000® thread, flat head and hexalobular drive
Dust extraction drill bit Max M
Stud with threaded end ≈ 2d
Cut protection glove W-110 Level B
Solar mounting, WSF type BZ, variant 2 For pre-assembled steel substructures, special type for trapezoidal profile and sandwich element roofing
Hexagon socket screw-in nut with collar, imperial DIN 908, steel, zinc-plated, blue passivated (A2K)
Hexagon Socket Head Cap Screw ISO 4762/DIN 912, steel 8.8, plain