BoxSok™ bolt socket head
BoxSok bolt socket head
PLGINTL-3/8IN-HEX-WS18
Register now and access more than 125,000 products
- The tool fixes the collar of the expansion sleeve in place and simultaneously tightens the taper using the hexagon head bolt until the sleeve is expanded. Using the tool for screwing multiple hollow profile fasteners into place in series considerably reduces installation time
- The drive side of the special tool is equipped with a square socket and the output side with the required hexagon key sizes
Datasheets(X)
 | |
Thread type x nominal diameter | M12 |
Width across flats | 18 mm |
Outer diameter | 42 mm |
Drive | 3/8 inch |
Last viewed
Lock washer VS Spring steel, type VS, zinc-flake coating, silver (ZFSH)
Tapered pin, unhardened DIN 1 unhardened steel plain, version B (turned)
Countersunk head screw with hexagon socket ISO 10642, A2-070 stainless steel, plain
Safety shoe S2
Work trousers Kübler Activiq 2250 5365
Blind rivet, open, with break mandrel and countersunk head ISO 15980, countersunk head, steel/steel
Hexagonal bolt, with thread to head and fine thread DIN 961, steel 8.8, plain
Hexagon socket set screw with ring cutter ISO 4029, steel, 45H, plain
Threaded fitting DIN 976-1 (shape A) with standard metric ISO thread, zinc-plated steel 8.8, blue passivated
Hexagonal nut, low profile with clamping piece (non-metal insert), imperial