Brake calliper impact wrench, 3/4-inch FOR COMMERCIAL VEHICLES, MAN TGL/MB
Brake calliper impact wrench 3/4 inch hex
HEX-SLOGGING-SPANN-BRAKE-CAL-WREN.-22MM
Register now and access more than 125,000 products
- Primarily for use on front and trailing axles of commercial vehicles
- Even the most stubborn fittings can be loosened with a hammer blow to the wrench end.
- Wrench is equipped with a 3/4-inch square drive, enabling tightening in accordance with manufacturer's specifications in combination with a torque wrench.
- Removing the tie rod lever is no longer required.
Observe laser-engraved torque conversion formula (required as lever extension depends on design).
Datasheets(X)
Tip size | 22 mm |
Drive | 3/4 inch |
Length | 220 mm |
Suitable for vehicle type | MAN |
Product weight (per item) | 590 g |
Last viewed
STC end mill Speedtwister-Inox, extra long XL, five cutting edges, uneven angle of twist gradient, 5xD
City softshell vest
System case empty range 4.4.1
Low-cut safety shoes, S1
Metric combination wrench with POWERDRIV®
Protective glove, nitrile
Roof railing system trapezoid
Pipe clamp TIPP® Smartlock 2 GS Without rubber inserts
Hexagonal bolt with thread up to the head ISO 4017, steel 10.9, plain
System insert, plastic, 4.4.1