Brake calliper impact wrench, 3/4-inch FOR COMMERCIAL VEHICLES, MAN TGL/MB
Brake calliper impact wrench 3/4 inch hex
HEX-SLOGGING-SPANN-BRAKE-CAL-WREN.-27MM
Register now and access more than 125,000 products
- Primarily for use on front and trailing axles of commercial vehicles
- Even the most stubborn fittings can be loosened with a hammer blow to the wrench end.
- Wrench is equipped with a 3/4-inch square drive, enabling tightening in accordance with manufacturer's specifications in combination with a torque wrench.
- Removing the tie rod lever is no longer required.
Observe laser-engraved torque conversion formula (required as lever extension depends on design).
Datasheets(X)
Tip size | 27 mm |
Drive | 3/4 inch |
Length | 220 mm |
Suitable for vehicle type | Atego 12-tonnes |
Product weight (per item) | 569.000 g |
Last viewed
Raised countersunk head screw with H recessed head DIN 966, steel 4.8, zinc-plated, blue passivated (A2K)
High-visibility trousers
GEFU® thread-rolling screw With Taptite 2000® thread, countersunk head and hexalobular drive
Hexagonal bolt with shank
Special fuel TRIATHLON® 2T-Safetymix
Transport rollers For aluminium standing ladder with steps, riveted/aluminium single ladder with steps, riveted
Clamping pin/clamping sleeve
Support clip type SRV
Soft-face hammer Halder SIMPLEX soft-face hammer Series 3778
Flat washer without chamfer