Brake calliper impact wrench, 3/4-inch FOR COMMERCIAL VEHICLES, MAN TGM/TGL
Brake calliper impact wrench 3/4 inch TGM/TGL
E18-TX-SLOGGING-BRAKE-CAL.-WREN-3/4IN
Register now and access more than 125,000 products
- Primarily for use on front and trailing axles of commercial vehicles
- Even the most stubborn fittings can be loosened with a hammer blow to the wrench end.
- Wrench is equipped with a 3/4-inch square drive, enabling tightening in accordance with manufacturer's specifications in combination with a torque wrench.
- Removing the tie rod lever is no longer required.
Observe laser-engraved torque conversion formula (required as lever extension depends on design).
Datasheets(X)
Length | 220 mm |
Suitable for vehicle type | MAN |
Product weight (per item) | 523.000 g |
Last viewed
Hexagonal bolt with thread up to the head
Oval rosette Aluminium, inner PZ
Clamping pin/clamping sleeve, slotted, heavy-duty design ISO 8752 spring steel plain
Hook and loop support plate
Tensioning roller spanner assortment 14 pieces
Angled adapter for 1C combi foam
Hexagon socket set screw with truncated cone ISO 4026 steel 45H, plain
C 8.0 TX bit (5/16 inch) C 8.0 (5/16 inch)
Clipboard
Metric ratcheting box-end wrench With POWERDRIV® drive