Brake cleaner

Name: Brake cleaner
Brand: Würth
SKU: 08901087

Brake cleaner
BRKCLNR-500ML

Art.-no. 08901087

EAN 4011231893732

All versions

Similar products

Prices for customers after login

Brake cleaner

Art.-no. 08901087

Prices for customers after login

Quantity

Exclusively for trade customers

Login/Register
Call customer service:

For cleaning and degreasing during maintenance and repair work

Fast flash-off behaviour and excellent cleaning performance

Fast and effective removal of soot, grease, brake dust and oily residues

Residue-free cleaning

Acetone-free

High degree of material compatibility with paints, plastics, seals and rubber

AOX- and silicone-free

Notice

Do not spray on hot components. Not suitable for surface cleaning of adhesive areas. Prior to application, the compatibility of rubber or plastic parts and painted surfaces should be tested on an invisible area.

The usage instructions are recommendations based on the tests we have conducted and on our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We ensure the consistent quality of our products. We reserve the right to make technical changes and further develop products.

Product information

Würth Catalogue

Datasheets(X)

Safety data sheet

Certificates/ Documents

Application area

For quickly removing oily/greasy residues, soot, brake dust on vehicles, disc and drum brakes, engine and gearbox housings etc.

Instructions

Spray the surfaces to be cleaned and wipe with a clean cloth. Repeat the process for heavy soiling.

Contents	500 ml
Container	Aerosol can
Smell/fragrance	Solvent-like
Colour	Colourless
Chemical basis	Naphtha
Density/conditions	0.715 g/cm³ / at 20°C
Shelf life from production	24 Month
AOX-free	Yes
Silicone-free	Yes

Suitable glove:

Product

Description

Nitrile chemical protective glove With cotton velour finish inside

Description:

Permeation level: 6

Nitrile chemical protective glove Long, heavy-duty design

Description:

Permeation level: 6

Permeation is the process by which a chemical moves through the material of a protective glove on a molecular level. The time from the initial contact between the chemical and the glove to the permeation of the material is the breakthrough time.

Measured breakthrough time

Permeation level

< 10 min

≥ 10 min

≥ 30 min

≥ 60 min

≥ 120 min

≥ 240 min

≥ 480 min

Important information:

The information given is based on experience and laboratory conditions and is designed as a guide. However, the actual suitability of a glove depends on the individual conditions of its use and must be confirmed by an appropriate test under operational conditions. Given the variety of materials and chemicals used, the possibility of incompatibility or usage problems for the wearer cannot be excluded in individual cases. We would be happy to advise you about optimum solutions.