Brake fluid DOT 4 Plus For hydraulic brake systems

Name: Brake fluid DOT 4 Plus For hydraulic brake systems
Brand: Würth
SKU: 08920098

Brake fluid DOT 4 Plus
BRKFLUD-(DOT 4 PLUS)-5LTR

Art.-no. 08920098

EAN 4011231895392

All versions

Similar products

Prices for customers after login

Brake fluid DOT 4 Plus For hydraulic brake systems

Art.-no. 08920098

Prices for customers after login

Quantity

x 1 pcs

Exclusively for trade customers

Login/Register
Call customer service:

Prescribed for Mercedes Benz vehicles

Meets and exceeds the specifications: SAE J 1703, 1704, FMVSS 116, DOT 3 and DOT 4

Brake fluids can be mixed with any other commercial product that satisfies the following test requirements: FMVSS 116, SAE J 1703, 1704 or ISO 4925.

Formulated on the basis of glycol ethers

Excellent protection against corrosion compared to iron and non-ferrous metals.

High degree of thermal stability.

Good rubber compatibility.

Outstanding lubricating properties

Suitable for use in the hydraulic power transmission of clutch systems.

Notice

Brake fluid is hygroscopic.

Change brake fluids according to the vehicle manufacturer instructions. Under no circumstance mix with automatic transmission fluids (ATF) or mineral oils. Avoid contact with painted surfaces, as brake fluids have a solvent effect on paints.

The tap must only be used to pour brake fluid. After use (and during storage), always seal the canister with the original lid. The taps do not ensure that the brake fluid is not enriched with humidity. Please alert your customers to the correct storage method. Observe the information provided by the vehicle manufacturer.

The usage instructions are recommendations based on the tests we have conducted and are based on our experience; carry out your own tests before each application. We do not assume any liability for a specific application result due to the large number of applications and storage and processing conditions. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and further develop products.

Product information

Würth Catalogue

Datasheets(X)

Safety data sheet

Certificates/ Documents

Contents	5 l
Container	Canister
Colour	Yellow Amber
Smell/fragrance	Characteristic
Chemical basis	Polyglycol ether
Shelf life from production	36 Month
Min. wet boiling point	180 °C
Min. dry boiling point	270 °C
Density	1.075 g/cm³
Density conditions	at 20°C
pH value	7.7

Additional accessory:

Product

Description

Quantity

Price
/PU

Tap DN 45 thread for 5 l and 10 l plastic canisters

TAP-(F.PLACANI-5LTR)

Art.-no. 089130201

The tap makes it quick and easy to cleanly fill up and dispense liquids and helps with dosing large amounts of liquid in a short period of time.

x 1 pcs

Metal tap With 3/4 inch connection for 60 l metal drums

TAP-(F.METBARL-60LTR)-MET

Art.-no. 089130206

x 1 pcs

The packaging unit defines the number of articles in one packaging. In the catalog segment you can choose from different packaging units if a pop-up menu is displayed.

Just leave the field empty if you don't know the packaging unit when directly entering the article number in the shopping basket or when importing with Easy-/VarioScan. The packaging unit will be determined automatically.

The article number is made up of the following: VVVVAAABBB
VVVV = 4 digits for prefix number (please note that the first digit is currently always 0)
AAA = 3 digits for dimension part 1
BBB = 3 digits for dimension part 2

Example article number structures:
Example 1: Screw with dimensions of 4x10 mm:
VVVVAAABBB
00574 10 (2 spaces between the 4 and the 10)

Example 2: Screw with dimensions of 10x20 mm:
VVVVAAABBB
005710 20 (1 space between the 10 and the 20)

Example 3: Flat washer with an internal diameter of 6 mm:
VVVVAAABBB
04076

Price per packaging unit (PU):
The displayed price is always in line with the displayed packaging, if the PU is 250 the price for 250 units, if the PU is 300 the price for 300 units.

Price with price key representation (PSL):
The price always applies to a quantity ruled through the price key:
Price for 1 unit
Price for 100 units
Price for 1000 units

The quantity shows the number of pieces or units of measure contained in the order or delivery for the respective article.

In contrast to sales packaging and secondary packaging, the disposal costs for chemical-technical products are shown separately. The breakdown of the individual costs can be found on the relevant products and also in the shopping cart, as well as in our General Terms and Conditions (GTC).

Additive article:

Product

Description

Quantity

Price
/PU

Change label

LBL-F.BRKFLUD

Art.-no. 0892009999

x 50 pcs

The quantity shows the number of pieces or units of measure contained in the order or delivery for the respective article.

Suitable glove:

Product

Description

Chemical protective glove, Butyl

Description:

Permeation level: 6

Gas-tight and resistant to exhaust gases produced by combustion processes

Nitrile chemical protective glove With cotton velour finish inside

Description:

Permeation level: 3

Nitrile chemical protective glove Long, heavy-duty design

Description:

Permeation level: 4

Permeation is the process by which a chemical moves through the material of a protective glove on a molecular level. The time from the initial contact between the chemical and the glove to the permeation of the material is the breakthrough time.

Measured breakthrough time

Permeation level

< 10 min

≥ 10 min

≥ 30 min

≥ 60 min

≥ 120 min

≥ 240 min

≥ 480 min

Important information:

The information given is based on experience and laboratory conditions and is designed as a guide. However, the actual suitability of a glove depends on the individual conditions of its use and must be confirmed by an appropriate test under operational conditions. Given the variety of materials and chemicals used, the possibility of incompatibility or usage problems for the wearer cannot be excluded in individual cases. We would be happy to advise you about optimum solutions.