Brake fluid DOT 5.1 for hydraulic brake systems

Name: Brake fluid DOT 5.1 for hydraulic brake systems
Brand: Würth
SKU: 0892009510

Brake fluid DOT 5.1
BRKFLUD-(DOT5.1)-5LTR

Art.-no. 0892009510

EAN 4099618255540

All versions

Similar products

Prices for customers after login

Brake fluid DOT 5.1 for hydraulic brake systems

Art.-no. 0892009510

Prices for customers after login

Quantity

x 2 pcs

Exclusively for trade customers

Login/Register
Call customer service:

For use in high-stress vehicle brake systems requiring a synthetic brake fluid in accordance with DOT 5.1. Particularly recommended for brake systems with ABS.

Meets and exceeds the specifications: SAE J 1704, FMVSS 116 DOT 5.1

Brake fluid can be mixed with all synthetic brake fluids that meet the test requirements of FMVSS 116, SAE J 1704 or ISO 4925.

Class 5.1 and 7 according to ISO 4925

Formulated on the basis of glycol ether

Optimal corrosion protection compared to iron and non-ferrous metals

Excellent thermal stability even under racing conditions

Compatible with all seals and hoses commonly used in the brake system

Excellent oxidation stability and reduced hygroscopic properties guarantee a high safety margin

Excellent lubricating properties

Suitable for use in the hydraulic power transmission of clutch systems.

Suitable for innovative brake systems (e.g. ESP)

Developed for and tailored to the technical requirements of vehicle manufacturers.

Low viscosity guarantees proper system operation even at low outside temperatures and increases driving safety.

Notice

Brake fluid is hygroscopic. Change brake fluid according to the vehicle manufacturer instructions. Under no circumstances mix with automatic transmission fluids (ATF) or mineral oils. Avoid contact with painted surfaces, as brake fluids have a solvent effect on paints. The tap must only be used to pour brake fluid. After use (and during storage), always seal the canister with the original lid. The taps do not ensure that the brake fluid does not accumulate humidity. Please alert your customers to the correct storage method. Observe the information provided by the vehicle manufacturer.

The usage instructions are recommendations based on the tests we have conducted and on our experience; carry out your own tests before each application. Due to the large number of applications and storage and usage conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We ensure the consistent quality of our products. We reserve the right to make technical changes and further develop products.

Product information

Würth Catalogue

Datasheets(X)

Safety data sheet

Certificates/ Documents

Application area

Hydraulic vehicle and motorcycle brake systems requiring a synthetic brake fluid in accordance with DOT 5.1.

Contents	5 l
Container	Canister
Colour	Amber, Yellow
Chemical basis	Polyglycol ether
Shelf life from production	24 Month
Min. wet boiling point	180 °C
Min. dry boiling point	260 °C
Density	1.06 g/cm³
Density conditions	at 20°C
pH value	0 - not applicable
Utilisation category	Class 5.1, Class 7

Additional accessory:

Product

Description

Quantity

Price
/PU

Tap DN 45 thread for 5 l and 10 l plastic canisters

TAP-(F.PLACANI-5LTR)

Art.-no. 089130201

The tap makes it quick and easy to cleanly fill up and dispense liquids and helps with dosing large amounts of liquid in a short period of time.

x 1 pcs

The packaging unit defines the number of articles in one packaging. In the catalog segment you can choose from different packaging units if a pop-up menu is displayed.

Just leave the field empty if you don't know the packaging unit when directly entering the article number in the shopping basket or when importing with Easy-/VarioScan. The packaging unit will be determined automatically.

The article number is made up of the following: VVVVAAABBB
VVVV = 4 digits for prefix number (please note that the first digit is currently always 0)
AAA = 3 digits for dimension part 1
BBB = 3 digits for dimension part 2

Example article number structures:
Example 1: Screw with dimensions of 4x10 mm:
VVVVAAABBB
00574 10 (2 spaces between the 4 and the 10)

Example 2: Screw with dimensions of 10x20 mm:
VVVVAAABBB
005710 20 (1 space between the 10 and the 20)

Example 3: Flat washer with an internal diameter of 6 mm:
VVVVAAABBB
04076

Price per packaging unit (PU):
The displayed price is always in line with the displayed packaging, if the PU is 250 the price for 250 units, if the PU is 300 the price for 300 units.

Price with price key representation (PSL):
The price always applies to a quantity ruled through the price key:
Price for 1 unit
Price for 100 units
Price for 1000 units

The quantity shows the number of pieces or units of measure contained in the order or delivery for the respective article.

In contrast to sales packaging and secondary packaging, the disposal costs for chemical-technical products are shown separately. The breakdown of the individual costs can be found on the relevant products and also in the shopping cart, as well as in our General Terms and Conditions (GTC).